Sharp XV-Z9000E Power ON/OFF, Zooming and Focusing, Press Power on, Press Power OFF, Buttons

Page 19

Power ON/OFF

Setup Connections&

Projector

Remote control

POWER

 

buttons

Maintenance indicator

TEMP. LAMP POWER

Press POWER ON.

The flashing blue LAMP REPLACEMENT indicator shows that the lamp is warming up. Wait until the indicator stops flashing before operating the projector.

If the power is turned off and then immediately turned on again, it may take a short while before the lamp turns on.

After the projector is unpacked and turned on for the first time, a slight odour may be emitted from the exhaust ventilative hole. This odour will soon disappear with use.

When the power is on, the LAMP REPLACEMENT indicator lights, indicating the status of the lamp. Blue: Lamp is ready.

Flashing blue: Warming up.

Red: Change the lamp.

Press POWER OFF.

Press POWER OFF again while the message is displayed.

• If you accidentally pressed POWER OFF and do not want to turn off the power, wait until the message disappears.

• When POWER OFF is pressed twice, the POWER indicator will light up red and the cooling fan will run for about 90 seconds. The projector will then enter standby mode.

• Wait until the cooling fan stops running before disconnecting the power cord.

• The power can be turned on again by pressing POWER ON. When the power is turned on, the POWER indicator and the LAMP REPLACEMENT indicators light blue.

Zooming and Focusing

The picture can be zoomed in or out, and focused by the Zoom knob and the Focus ring.

1 Slide the Zoom knob. The image can be adjusted to the desired size within the zoom range.

 

2 Rotate the Focus ring until the image on the

1

screen becomes clear.

2

 

17

Image 19
Contents XV Z9000E Page English Lamp Replacement Caution Important Safeguards Important Safeguards Using the Terminal Cover Temperature Monitor FunctionLamp Monitor Function Wide DMD*1 Digital Micromirror Device Chip Outstanding FeaturesFor Windows For Macintosh To Install Acrobat Reader from the CD-ROMFor other operating systems For other languages Contents Projector Part NamesPart Names Battery cover Cover Compartment Remote ControlInserting the batteries Power cord Supplied AccessoriesFor Europe only Connections Power SupplyConnecting to Video Equipment Connecting the Power CordProjector Connecting to Video EquipmentConnecting other compatible computers Connecting to a ComputerConnecting RS-232C port Using as a Wired Remote Control Operating the Remote ControlUsing the remote control in a dark room Press Power OFF Power ON/OFFZooming and Focusing Press Power onReturning the projector to its original position Setting Up the ScreenUsing the Adjustment Feet Using the Lens ShiftKeystone Correction When using a wide screen Adjusting the Projection DistanceStandard Setup Front Projection When using a normal screenConnections Adjusting the Projection DistanceUpper and Lower Lens Shift Position Upper and Lower Lens Shift Position Ceiling MountCeiling-mount Projection Projection Using a MirrorImage Projection Rear ProjectionButtonsOperation Using the Operation ButtonsSelecting the Input Signal Source Adjusting the Picture Aspect RatioVIDEO/DVD/DTV Adjusting the Picture Aspect RatioGamma Modes Gamma Correction FunctionBasic Operations Input 3, 4 Video mode Input 1, 2 Component or 5 RGB modeMenu Bars Items on the Input 3 or 4 Mode Menu BarMain menu Menu Bars Items on the Input 1, 2 or 5 Mode Menu BarDescription of Adjustment Items Adjusting the PictureOperationBasic Adjusting the Colour Temperature using the GUI Menu Screen Adjusting the Colour TemperatureAdjusting the Picture Adjusting the Colour Temperature with the Remote ControlProgressive Mode Selecting the Signal TypePreset settings Adjusting the Computer Images RGB menu onlySelecting a saved setting Saving and Selecting Adjustment SettingsAdjusting the Computer Images RGB menu only Saving the adjustment settingChecking the Input Signal Special Mode AdjustmentOff Auto Sync AdjustmentAuto Sync Display Function Reducing Image Noise Video menu onlyTurning On/Off the On-screen Display Setting the Video Signal Video menu onlyDescription of OSD Display Operating the Theatre Mode Function with the Remote Control Theatre Mode FunctionsDescription of Theatre Modes Description of Background Images Selecting a Background ImageDescription of Subtitle Setting Subtitle SettingDigital shift RS-232C Off Function Selecting the Economy ModeAutomatic Power Shut-off Function Description of Automatic Power Shut-offSelecting the Transmission Speed RS-232C Selecting the On-screen Display Language Reversing/Inverting Projected ImagesDescription of Projected Images Displaying the Adjustment Settings Troubleshooting Maintenance Lamp/Maintenance IndicatorsMaintenance Indicators Condition Problem Possible SolutionConfirming the Lamp Usage Time Lamp MaintenanceReplacing the Lamp Replacing the Lamp Removing and installing the lamp unitUsing the Kensington Lock Cleaning the Air FiltersHow to clean the air filters Problem Check TroubleshootingPin No Signal Name Reference Connecting Pin AssignmentsRGB Input Communication conditions RS-232C Specifications and Command SettingsCommands PC controlRS-232C Specifications and Command Settings Options PRJ Mode Function and transmission codes Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Sharp remote control signal formatComputer Compatibility Chart Dimensions PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsAspect ratio GlossaryCinema Zoom IndexSharp Corporation

XV-Z9000E specifications

The Sharp XV-Z9000E is a cutting-edge DLP (Digital Light Processing) projector that has made waves in the home theater industry for its exceptional performance and advanced features. Launched with a focus on delivering high image quality, the XV-Z9000E is designed for cinema lovers and professional environments alike.

One of its standout features is its impressive resolution. The projector supports true HD (1920x1080) resolution, providing sharp, detailed images that enhance the viewing experience. Whether you are watching movies, playing video games, or presenting business materials, the clarity offered by the XV-Z9000E ensures that no detail goes unnoticed.

The brightness rating of the XV-Z9000E is another significant aspect, with capabilities of delivering up to 1600 ANSI lumens. This high brightness level allows for clear image reproduction even in well-lit environments, making it versatile for various settings, whether it's a home theater room or a conference space.

Sharp's proprietary DLP technology is integrated into the XV-Z9000E to ensure high contrast ratios, resulting in depth and vibrancy in colors. The contrast ratio of 4000:1 delivers striking differences between light and dark areas of the image, creating lifelike visuals that enhance overall picture quality.

For connectivity, the XV-Z9000E is equipped with multiple input options, including HDMI, VGA, and component video, providing flexibility for various devices. This capability ensures compatibility with modern gaming consoles, Blu-ray players, and computers, making it a multifunctional projector suitable for diverse uses.

One notable feature is the 8-segment color wheel, which enhances color accuracy and minimizes rainbow effects, a common issue found in some DLP projectors. This technology contributes to richer color reproduction that captivates viewers.

The XV-Z9000E also boasts a comprehensive motorized lens system that enables easy adjustment of zoom and focus. This user-friendly design allows for seamless installation and configuration, accommodating different room sizes and viewing scenarios.

In conclusion, the Sharp XV-Z9000E projector blends high-definition resolution, impressive brightness, advanced DLP technology, and versatile connectivity to create an outstanding visual experience. Its design and capabilities make it an ideal choice for both home entertainment and professional presentations, setting a high standard in the world of projectors.