Onkyo TX-8555 instruction manual Using the Remote Controller, Return button, Pure a button

Remote Controller—Continued

SRETURN button

Selects the previously displayed setup menu.

TPURE A button (25)

Selects the Pure Audio listening mode.

Note:

•An Onkyo cassette recorder connected via can also be controlled in Receiver mode (see page “Controlling a Cassette Recorder” on page 43).

Using the Remote Controller

Point the remote controller toward the remote control sensor.

Remote control sensor

About 5 m (16 feet)

Notes:

•The remote controller may not work reliably if the receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing.

•If another remote controller of the same type is used in the same room, or the receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

•Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.

•The remote controller may not work reliably if the receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obstacle between it and the receiver’s remote control sensor.

12