Onkyo TX-8555 instruction manual Using Zone, Controlling Zone 2 from the receiver

Zone 2—Continued

Using Zone 2

This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.

Controlling Zone 2 from the receiver

ZONE 2 LEVEL/TONE

OFF

ZONE 2

1	To turn on Zone 2 and select an
	input source, press the [ZONE 2]
	button repeatedly.
	Alternatively, press the [ZONE 2]
	button followed by an input
	selector button within 8 seconds.

Zone 2 turns on and ZONE 2 indicator lights up.

To select the same source as that of the main room, press the [ZONE 2] button repeatedly until “Zone 2 Sel: Source” appears.

To select AM or FM, press the [TUNER] Input Selector button repeatedly. On the North American model, you can also select XM/SIRIUS.

Note:

•You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room.

2	To turn off Zone 2, press the Zone
	2 [OFF] button.

Notes:

•While Zone 2 is on, the Auto Power On/Standby and

Direct Change functions do not work.

•When you control Zone 2 with the remote controller while main room is standby, the display doesn’t work.

Controlling Zone 2 with the Remote Controller

ON/STANDBY ZONE 2

Input selector buttons

VOL/

MUTING

1	Press the [ZONE 2] button, then
	point the remote controller at the
	receiver and press the
	[ON/STANDBY] button.
	Zone 2 turns on and ZONE 2 indicator
	lights up.

2	To select an input source for
	Zone 2, press the [ZONE 2]
	button, followed by an Input
	Selector button.

To select AM or FM press the [TUNER] Input Selector button repeatedly. On the North American model, you can also select XM/SIRIUS.

Note:

• You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room.

37