WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
Figure
Connecting Power
Warning: This procedure should be performed by a trained technician.
1.Make sure you understand the procedure and all precautions.
Before beginning, read the entire procedure. Make sure you understand all the precautions in these steps, as well as those listed on page
2.Make sure that your site’s electrical system is compatible with the WFS709TP. See Appendix B, “Specifications”.
Note: Use of a power line conditioner or Uninterruptible Power Supply (UPS) can decrease or mitigate problems caused by power service fluctuations. Make sure
that the output of any power shaping device is compatible with the WFS709TP power supplies.
Installing the Chassis |