Seiko Group FB 380 user manual To enter the Setup Menu System and change the settings

Page 23

To enter the Setup Menu System and change the settings

1.Lift the window cover of the printer.

2.Eject any paper currently in the printer (or park tractor paper) then switch the printer online.

3.Keep pressing the PARK/LOAD key for 3 seconds.

This starts the Setup Menu System and prints the instructions for using it. The current setting is underlined.

The print head points to the current selection in the menu.

4.Make a selection from the menu with the keys on the control panel:

Press:	To:
PARK/LOAD	Move the print head to the next menu selection. Repeat this until
	you get the selection that you want.
LF/FF	Save the setting that is currently indicated by the print head
	position, and go to the next menu.
ONLINE	Move to the next menu without altering the current setting.
COPY	Go to the next menu group.

5.When you have made all of your settings (remember that you don’t have to do go all the way through the menu system), switch the printer off and then turn on again.

Each time you switch the printer on, it uses the new saved settings. Keep the printout of the menu selections so that you know what the current settings are.

To exit the Setup Menu System

Turn the printer off, and then turn on again. * New settings of the menu will be stored.

NOTE

1.You do not have to go all the way through the menu system. Once you have made all the changes you want, you only need to exit the Setup Menu System by switching off the printer. When you switch it on again, the printer uses the new settings.

2.When the compress mode is effective, the High Speed mode will not be valid.

Printing the Current Setting Report

You can use the information in the current report to decide which settings you want to change.

To print the current settings:

1.Turn the printer off.

2.Hold down both the PARK/LOAD and LF/FF keys

3.Turn the printer on.

18

Image 23

Contents Seiko Precision Important Safety Instructions Table of Contents To enter the Setup Menu System and change the settings Epson Emulation Select Code Pages Overview FeaturesUser-Friendly Control Panel Automatic Interface SwitchingHigh Resolution Graphics High Quality, High Speed PrintingUnpacking PreparationMain parts of printer front view Parts IdentificationInstalling and Replacing the Ribbon Cassette InstallationInstalling the Front Table Extension Tray Make sure that the following Connecting the Power Cord Connecting the Interface CableUsing the Parallel Interface and the USB Interface Connecting to the Power SourceTurning the Power on and off Position Copies Thickness Paper Thickness AdjustmentAdjusting the gap adjust lever Loading PaperLoading cut sheet Loading Cut SheetsLoading Tractor Paper Using Tractor PaperSetting tractor paper into the tractor Align the paper with the print start position Tearing off Tractor PaperPrinting from Your Software Setting Up Your Printer To Work With Software Off LED Indicator Control Panel Control Panel Keys and LEDsBasic Control Panel Operations Top of Form Adjustment ModeTo exit without saving, just turn off the printer Tear-off Adjustment ModeUsing the Setup Menu System To exit without saving, just turn the printer OFFTo print the current settings To enter the Setup Menu System and change the settingsTo exit the Setup Menu System Printing the Current Setting ReportPage Seiko Precision FB-380 Setup Menu System Options of the Setup Menu SystemFont Options DescriptionSlide Pattern Printing Test Restoring Factory Printer SettingsUsing the Self Test Functions Maintenance Printing Test H patternPrint Mode Hex Dump ModeAppendix a Maintenance and Fault FindingCleaning the Cabinet Intervals and Materials for Cleaning Cleaning the platenError Cause Remedy Error LED on the Control PanelPrint Head SpecificationsAppendix B GeneralPaper MechanismMode ×H inches Print mode specificationsParallel Interface Graphic Print SpecificationsSignal Pin No Return Line Pin No Signal Name Signal DirectionEpson Emulation Command Code SummaryUSB Interface Character Set Name Code SymbolPrint Mode Input Data Control Graphics ModeDownload Character Bit-ImageSelect Code Pages Page Page Page Page Page Page Page Page