Seiko Group FB 380 user manual Graphic Print Specifications, Parallel Interface, Signal Direction

Page 36

Graphic Print Specifications

	Graphic type		Horizontal dot	Multipart mode	Print speed
	Density	Pins	pitch	Multipart mode	(inch/second)
	Density	Pins	pitch		(inch/second)
				Normal、Dark 1	9.9
	120dpi	24	1/240 inch	Dark 2	8
				Dark 3	3.9

				Normal、Dark 1	6.6
	180dpi	24	1/360 inch	Dark 2	5.3
				Dark 3	2.6
				Normal、Dark 1	6.6
	360dpi	24	1/360 inch	Dark 2	5.3
				Dark 3	2.6

Parallel Interface

Signal level
Input	High level: 2 to 5V, Low level: 0 to 0.8V
Output	High level: 2.4 to 5V, Low level: 0 to 0.4V
Connector Pin Assignments
Signal Pin No.		Return Line Pin No.	Signal Name
1		19	/STROBE
2～9		20～27	DATA
10		28	/ACK
11		29	BUSY
12		30	PE
13		——	SELECT
14		——	/AUTO FEED
15		——	NC
16		——	SIGNAL GND
17		——	CHASSIS GND
18		——	+5V
31		——	/PRIME
32		——	/ERROR
33		——	SIGNAL GND
34		——	NC
35		——	PULLED UP 5V
36		——	/SELECT IN

Signal Direction

Printer ←Host

Printer ←Host

Printer →Host

Printer →Host

Printer →Host

Printer →Host

Printer ←Host

NC

Printer↔ Host

Printer↔ Host

Printer →Host

Printer← Host

Printer →Host

Printer ↔Host

Printer →Host

Printer →Host

Printer← Host

31

Image 36

Contents Seiko Precision Important Safety Instructions Table of Contents To enter the Setup Menu System and change the settings Epson Emulation Select Code Pages Features OverviewAutomatic Interface Switching High Resolution GraphicsHigh Quality, High Speed Printing User-Friendly Control PanelPreparation UnpackingParts Identification Main parts of printer front viewInstallation Installing the Front Table Extension TrayInstalling and Replacing the Ribbon Cassette Make sure that the following Connecting the Interface Cable Using the Parallel Interface and the USB InterfaceConnecting to the Power Source Connecting the Power CordTurning the Power on and off Paper Thickness Adjustment Adjusting the gap adjust leverLoading Paper Position Copies ThicknessLoading Cut Sheets Loading cut sheetUsing Tractor Paper Loading Tractor PaperSetting tractor paper into the tractor Tearing off Tractor Paper Align the paper with the print start positionSetting Up Your Printer To Work With Software Printing from Your SoftwareLED Indicator Control PanelControl Panel Keys and LEDs OffTop of Form Adjustment Mode Basic Control Panel OperationsTear-off Adjustment Mode Using the Setup Menu SystemTo exit without saving, just turn the printer OFF To exit without saving, just turn off the printerTo enter the Setup Menu System and change the settings To exit the Setup Menu SystemPrinting the Current Setting Report To print the current settingsPage Seiko Precision FB-380 Options of the Setup Menu System Setup Menu SystemOptions Description FontRestoring Factory Printer Settings Using the Self Test FunctionsMaintenance Printing Test H pattern Slide Pattern Printing TestHex Dump Mode Print ModeMaintenance and Fault Finding Cleaning the CabinetAppendix a Cleaning the platen Intervals and Materials for CleaningError LED on the Control Panel Error Cause Remedy Specifications Appendix B General Print HeadMechanism PaperPrint mode specifications Mode ×H inchesGraphic Print Specifications Signal Pin No Return Line Pin No Signal NameSignal Direction Parallel InterfaceCommand Code Summary USB InterfaceEpson Emulation Name Code Symbol Print ModeCharacter Set Graphics Mode Download CharacterBit-Image Input Data ControlSelect Code Pages Page Page Page Page Page Page Page Page