Sharp PN-TPC2W7A, PNTPC2W7A manual Installation

Page 8

Installation

There are two fingers on the left side of the mounting plate to catch the PN-TPC2W7A in place as shown in Figure 6, and they need to be tightened with two include M3 screws.

6.Connect the HDMI video cable and the USB cable prior to turning on the PN- TPC2W7A.

7.Finish

Plug in the DC power cord into the PN-TPC2W7A’s power connector as in Figure 7.

Figure 6

Figure 7

Image 8

Contents PN-TPC2W7A VersionGetting Started Introduction to PN-TPC2W7AFederal Communications Commission FCC Statement Specifications Specifications con’t Mounting PN-TPC2W7A on Sharp PN-L Series Displays Attach the mounting plateSet the AC power adapter in place Install the PN-TPC2W7AInstallation Rear Connector Layout Audio Port ChannelRear Connector Layout con’t How to Recover to Factory Installed Condition Before beginningSupport & RMA Trademarks