Sharp PNTPC2W7A manual Set the AC power adapter in place, Install the PN-TPC2W7A

Installation

4. Set the AC power adapter in place

Place the AC power adapter into the holder on the right side of the mounting plate as in Figure 3.

AC power cord faces downward and the DC power cord to the PN-TPC2W7A faces upward.

5. Install the PN-TPC2W7A

If you look at the right side of the PN-TPC2W7A before sliding it into the mounting plate as in Figure 4, there are two small slits near the edges on the PN-TPC2W7A and two small fingers on either side of AC power adapter holder on the mounting plate.

As you slide the PN-TPC2W7A into the mounting plate, insert the two fingers into these slits as in Figure 5.

Figure 3

Figure 4

Figure 5

6