4.24 Wireless antennas/ LCD harness | 4 Replacement Procedures |
2.Remove the following screw securing the LCD harness holder and remove the LCD harness holder (middle frame side).
? M2.5? 2.8B FLAT BIND screwx1
3. Remove the LCD harness from the guide.
M2.5x2.8B FLAT BIND
LCD harness holder
LCD harness
Figure 4-46 Removing the LCD harness holder (middle frame side)
Installing the LCD harness
The following describes the procedure for installing the LCD harness (See Figure
1.Arrange the LCD harness to the guide.
2.Install the LCD harness holder (middle frame side) and secure it with the following screw.
? M2.5? 2.8B | FLAT BIND screw | x1 |
3.Attach the LCD harness holder (display cover side) and secure it with the following screw.
? M2.5? 4B | FLAT BIND screw | x1 |
QOSMIO F10 Maintenance Manual |