Toshiba qosmio f10 manual CD Sound Standard test

3.30 Sound Test program 3 Tests and Diagnostics

3.30.3 CD Sound (Standard) test

To execute the CD Sound (Standard) test, press 3 and Enter. Insert the test media (TOSHIBA TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the test media can not be prepared). The menu appears in the display.

For details on use of test media, refer to (1) Test media (Toshiba-made test media). For details on use of audio CD on the market, refer to (2) Audio CD.

(1) Test media (Toshiba-made test media)

CD/DVD TEST IN PROGRESS XXXXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB-TEST	: XX
PASS COUNT	: XXXXX	ERROR COUNT: XXXXX
WRITE DATA	: XX	READ DATA : XX
ADDRESS	: XXXXXX	STATUS	: XXX

01 – Japanese Narration

02 – English Narration

03 – Test Tone A (100Hz – 20Hz)

04 - Test Tone B (400Hz – 3KHz L-R)

Drive # = 0, ATAPI status =00 Command = XX

[[Block address = XXXXXXXX]] [[Block length = XXXXXXXX]]

Final : Block address = XXXXXXXXX

Subtest01	Japanese Narration
	When selecting this subtest, narration in Japanese starts and following message
	appears in the display.
	Play start CD sound !
	Press any key <Play stop>.

3-88 QOSMIO F10 Maintenance Manual (960-498)