3 Tests and Diagnostics | 3.27 Wireless LAN Test Program |
| Press any key to return to the test menu. |
| When a defective is detected in the test, following typical cause is considered. |
| ? Bad connection of wireless LAN card |
| ? Defective wireless LAN card |
| ? Disappearance of MAC address data |
| Check the connection and execute the subtest again. |
Subtest03 | Antenna check & communication test of 11b mode |
Caution: To execute subtest
Be sure to turn the wireless communication switch ON before executing wireless LAN communication test. (The wireless communication LED lights orange.)
Release the
Turn on the responder machine before selecting subtest
Setting the responder machine
Connect the responder machine to the access points (for 802.11a, 802.11b and 802.11g) with a cross cable and turn on the access points.
Insert the floppy disk containing the wireless LAN test program into the FDD of the responder machine and turn on the responder machine.
This subtest checks the connection and communication of wireless LAN antenna of Calexico 802.11b mode.
After finishing the test, OK message will appear in the display. Press any key and return to the test menu.
When a defective is found during the test, NG message will appear in the display. Press any key and following message will appear in the display. Check which antenna (Main/Aux) is defective.
*************************************************************
* |
| * |
* | Aux Antenna Test : NG !! | * |
QOSMIO F10 Maintenance Manual |