Toshiba qosmio f10 manual Cd-Rom

3.31 SETUP	3 Tests and Diagnostics
Mode 1	Sets to Mode1. (Default)
	Glows blue (Power ON) / Glows yellow (Standby) / Glows
	orange (Power OFF/Hibernation)
Mode 2	Sets to Mode 2.
	Glows blue (Power ON) / Alternately flashes green and orange
	(Standby) / Alternately flashes green and blue (Power
	OFF/Hibernation)
Mode 3	Sets to Mode 3.
	Flashes in order of green, orange and blue (Power ON) /
	Glows yellow (Standby) / Glows orange (Power OFF
	/Hibernation)

(h)Language During Bootup

This option selects the language during bootup. This message appears only on the model for TCL (Canada).

English	The message is displayed in English. (Default)
French	The message is displayed in French.

8.Configuration

This option lets you set the device configuration.

All Devices	BIOS sets all devices.
Setup by OS	Initializes devices, which is needed to load an operating
	system. Operating system initializes other devices.

NOTE: When using installed OS, selecting “Set by OS” is recommended. But when executing test programs, select “ALL Devices”.

9.Drives I/O

This option displays the address and interrupt level for hard disk drive and optical disk drive. It is for information only and cannot be changed.

Built-in HDD	This cannot be changed.
CD-ROM	This cannot be changed. This is not displayed when a drive
	is not built-in.
10. PCI Bus

3-102 QOSMIO F10 Maintenance Manual (960-498)