2 Troubleshooting Procedures | 2.13 Wireless LAN Troubleshooting |
Procedure 2 Antennas' Connection Check
The wireless LAN
Any of the connections may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and check the followings:
Check 1 Make sure the wireless communication switch is “On”.
If the switch is “Off”, turn it “On”. If there is still an error, perform Check 2.
Check 2 Make sure the wireless LAN board is firmly connected to the CN2200 on the system board.
If the wireless LAN board is disconnected, connect it firmly and perform Procedure 1. If the problem still occurs, perform Check 3.
Check 3 Make sure that the wireless LAN antenna cables (black and white) are firmly connected to the connector on the wireless LAN board.
If the wireless LAN antenna cables are disconnected, connect them firmly and perform Procedure 1. If the problem still occurs, go to the procedure 3..
QOSMIO F10 Maintenance Manual |
