Toshiba qosmio f10 manual Removing the cables

4.8 Display assembly 4 Replacement Procedures

5.Disconnect the LCD harness from the connector PJ5600 on the system board.

6.Unlock the connector CN3201 and disconnect the touch pad cable from the connector on the system board.

7.Unlock the connector CN9550 and disconnect the SJ board flat cable from the connector on the sound board.

8.Take out the wireless LAN antenna cables under the insulators and pull out it from the upper side of the slot.

Upper side of the slot

SJ board flat cable

PJ9550

LCD harness

Insulator

PJ5600

PJ3201

Touch pad cable

Figure 4-16 Removing the cables

4-28 QOSMIO F10 Maintenance Manual (960-498)