4.23 LCD unit/FL inverter 4 Replacement Procedures
4-60 QOSMIO F10 Maintenance Manual (960-498)
9. Remove the following screws fixing the LCD unit.
? M2x4Z SUPER THIN HEAD screw x4
10. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the aluminum tape, d isconnect the LCD harness
from the connector on the back of the LCD unit. Remove the LCD unit.
Figure 4-41 Removing the LCD unit
M2x4Z SUPER THIN HEAD
Aluminum tape
(Fit the right side
to
the connector of
the cable and the
top to the
connector on the
board.)
LCD harness
LCD unit