Shark PG-D4010X quick start Troubleshooting with the Help Menu, Utilizing the Help Menu Functions

Troubleshooting with the “Help” Menu

This function advises you to solve the problems during usage.

Utilizing the “Help” Menu Functions

Example: When image flickering appears

Operation to solve image fl ickering when projecting the computer RGB signal.

1 Press MENU/HELP.

2 Press O or Q to select “Help”, then press ENTER.

3 Press P or R to select “Vertical stripes or flickering image appears” on Help menu, then press ENTER.

Pict. SCR PRJ Net. Help

Vertical stripes or flickering image appear

There is no picture or audio

Vertical stripes or flickering image appear

Data image is not centered

Color is faded or poor

Picture is dark

The image is distorted

It is difficult to hear audio

Reset all adjustments to default settings

SEL. ENTER END

Press ENTER.

Help

Vertical stripes or flickering image appear

Initiate “Auto Sync” Adjustments.

If there is no change after performing "Auto Sync" adjustments, adjust the following items.

Adjust vertical noise

Adjust horizontal noise

Reset the 2 items above

Return

Signal Info 1024768

H48.3 kHz / V 59.9 Hz

SEL. ENTER END

ENTER button

Adjustment buttons (P/R/O/Q)

MENU/HELP button

4 Select “Initiate “Auto Sync” Adjustments”, then press ENTER.

5 If the image is not improved, select “Adjust horizontal noise”, then press ENTER.

6 Press O or Q to adjust.

Help

Phase	0
SEL./ADJ.	Rtn. Menu	END

Note

•You can adjust the items with check marks (✔).

•The items in the “Help” menu change, depending on the input signal or setting that you have selected.

•If the problem is not solved, refer to “Troubleshooting” (see pages 59 and 60).

•When selecting “sRGB” in “Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types.

Features Useful

51