Shark PG-D4010X Operating with the Remote Control, Displaying and Setting the Break Timer

Operating with the Remote Control

BREAK TIMER button

FREEZE button

MAGNIFY buttons

POINTER button

SPOT button

Adjustment buttons

(P/R/O/Q)

EFFECT button

PICTURE MODE button

ECO+QUIET button AUTO SYNC button

Displaying and Setting the Break Timer

1 Press BREAK TIMER.

•The timer starts to count down from 5 minutes.

On-screen display

2 Press P/R/O/Q to adjust the length of the break time.

• Increases with P or Q

5 minutes ➞ 6 minutes ➞ 60 minutes

• Shortens with O or R

4 minutes ➞ 3 minutes ➞1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

Press BREAK TIMER.

Note

•Break Timer does not function while the projector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

Displaying the Pointer

1 Press POINTER and press P/R/ O/Qon the remote control to move the pointer.

•Press EFFECT to change the pointer icon (5 types).

Star Finger1 Finger2 Heart Underline

2 Press POINTER again.

• The pointer will disappear.

Using the Spot Function

1 Press SPOT and press P/R/O/Q on the remote control to move the spot area.

•Press EFFECT to change the spot area size (3 types).

1/9 1/25 1/8

2 Press SPOT again.

• The spot area will disappear.

Switching the Eco+Quiet Mode

Press ECO+QUIET to switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.

Note

• Refer to “Eco+Quiet” on page 42 for details.

32