Observe the following safeguards when setting up your projector.

Caution concerning the lamp unit

■ Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement.

See “Regarding the Lamp” on page 55.

Caution concerning the setup of the projector

■For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center.

When using the projector in high- altitude areas such as mountains (at altitudes of approximately 1,500 meters (4,900 feet) or more)

■When you use the projector in high-altitude areas with thin air, set “Fan Mode” to “High”. Neglecting this can affect the longevity of the optical system.

Warning about placing the projector in a high position

■When placing the projector in a high position, make certain it is carefully secure to avoid personal injury caused by the projector falling down.

Do not subject the projector to hard impact and/or vibration.

■Protect the lens so as not to hit or damage the surface of the lens.

Rest your eyes occasionally.

■Continuously watching the screen for long hours will cause eye strain. Take regular breaks to rest your eyes.

Do not set up the projector in places exposed to direct sunlight or bright light.

■Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Caution regarding placing of the projector

■Place the projector on a level site within the adjustment range (9 degrees) of the adjustment foot.

■After the projector is purchased, a faint smell from the vent may appear when the power is first turned on. This is normal and is not a malfunction. It will disappear after the projector is used for a while.

Avoid locations with extremes of temperature.

■The operating temperature of the projector is from 41°F to 95°F (+5°C to +35°C).

■The storage temperature of the projector is from –4°F to 140°F (–20°C to +60°C).

Do not block the exhaust and intake vents.

■Allow at least 11 13/16 inches (30 cm) of space between the exhaust vent and the nearest wall or obstruction.

■Ensure that the intake vent and the exhaust vent are not obstructed.

■If the cooling fan becomes obstructed, a protection circuit will automatically put the projector into standby mode to prevent overheat damage. This does not indicate a malfunction. (See pages 53 and 54.) Remove the projector power cord from the wall outlet and wait at least 10 minutes. Place the projector where the intake and exhaust vents are not blocked, plug the power cord back in and turn on the projector. This will return the projector to the normal operating condition.

8

Page 11 Page 13
Page 12
Image 12
Shark PG-D4010X quick start Rest your eyes occasionally, Avoid locations with extremes of temperature
Page 11 Page 13

PG-D4010X specifications

The Shark PG-D4010X is a cutting-edge vacuum cleaner that has garnered attention for its versatility and powerful performance. Designed for both efficient cleaning and convenience, the PG-D4010X stands out as an excellent addition to any home.

One of the standout features of the Shark PG-D4010X is its double motor system, which enhances suction power significantly. This technology allows the vacuum to deliver strong cleaning results on a variety of surfaces, including carpets, hardwood floors, and tiles. With an impressive suction capability, it effortlessly removes dirt, dust, and pet hair, making it ideal for households with pets.

The PG-D4010X also incorporates advanced anti-allergen technology. Equipped with a HEPA filter, it captures 99.9% of allergens and pollutants, ensuring that the air in your home remains clean and fresh. This feature is particularly beneficial for allergy sufferers, as it helps to reduce irritants commonly found in household environments.

Another highlight of the Shark PG-D4010X is its lightweight design, which enhances usability. Weighing considerably less than traditional vacuum cleaners, it allows for easy maneuvering around the house. The ergonomic handle further contributes to a comfortable cleaning experience, reducing strain during longer cleaning sessions.

This vacuum cleaner also features a versatile cleaning head, designed to transition smoothly between different floor types. The DuoClean technology combines a bristle brush and a soft brushroll to pull in large debris, while also engaging with fine dust on both carpets and hard floors. This dual-brush system ensures a thorough clean in one pass, saving time and effort.

Additionally, the Shark PG-D4010X includes several attachments that enhance its cleaning capabilities. The crevice tool, pet power brush, and dusting brush allow users to tackle corners, upholstery, and surfaces that are often hard to reach. These attachments provide a comprehensive cleaning solution, making it suitable for various household tasks.

The vacuum also has a generous dust capacity, allowing users to clean larger areas without frequent emptying. Its easy-to-empty canister design simplifies the maintenance process, ensuring that cleaning can be completed efficiently.

In summary, the Shark PG-D4010X is an innovative vacuum cleaner that excels in both performance and convenience. With its powerful dual motor, advanced filtration, lightweight design, and versatility, it promises to deliver exceptional cleaning results, making it a worthwhile investment for homes looking for an effective cleaning solution.
Top Page Image Contents