Toshiba qosmio f10 manual Replacement Procedures SD board/MDC, Installing the SD board

4 Replacement Procedures										4.9 SD board/MDC
		SD board flat cable		M2.5x4B FLAT BIND
M2.5x4B FLAT BIND
			SVP harness
					TV tuner coaxial cable
						CN2410
							TV tuner cable
								CN9614
								Speaker cable L
									RJ11 connector
										Core
	CN9510
		CN9615

PJ6002

PJ6003

USB harness

Speaker cable R

CN4620

Figure 4-19 Removing the SD board

Installing the SD board

The following describes the procedure for installing the SD board (See Figure 4-19).

1.Install the RJ11 connector and its core to each slot of the base assembly.

2.Install the SD board and secure it with the following screws . When installing, pass the USB harness through the cut area of the SD board.

? M2.5? 4B FLAT BIND screw x4

3.Connect the USB harness to the connector CN4620 on the SD board.

4.Connect the speaker cable L (red cable) and speaker cable R (blue cable) to the connectors CN6002 and CN6003 on the SD board.

5.Connect the SD board flat cable, TV tuner coaxial cable, TV tuner cable and SVP harness to the connectors CN9510, CN2410, CN9614 and CN9615 on the SD board respectively.

QOSMIO F10 Maintenance Manual (960-498) 4-33