Toshiba qosmio f10 manual Replacement Procedures Memory module, Removing the memory module

4 Replacement Procedures 4.4 Memory module

4.4Memory module

CAUTION: The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself.

Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend the memory module.

Removing the memory module

To remove a memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figure 4-6).

1.Loose the screw fixing the memory slot cover.

2.Remove the memory slot cover.

3.Open the left and right latches and remove the memory module.

Memory slot cover Screw

Latches

Slot B

Memory module (Slot A)

Figure 4-6 Removing the memory module

QOSMIO F10 Maintenance Manual (960-498) 4-15