Toshiba qosmio f10 manual System Test Name Xxxxxx

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics

Select the option you want to execute and press Enter. When you select 1- SYSTEM TEST,

the following message will appear:

SYSTEM TEST NAME XXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB-TEST	: XX
PASS COUNT	: XXXXX	ERROR COUNT: XXXXX
WRITE DATA	: XX	READ DATA	: XX
ADDRESS	: XXXXXX	STATUS	: XXX

SUB-TEST MENU :

01 - ROM checksum

02 – Fan ON/OFF

03 - Geyserville

04 - Quick charge

05 - DMI read

99 - Exit to DIAGNOSTIC TEST MENU

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

Select the desired subtest number from the subtest menu and press Enter. The following message will appear:

TEST LOOP : YES (or NO)

ERROR STOP : YES (or NO)

Use the right and left arrow keys to move the cursor to the desired option.

Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle.

Selecting NO returns the process to the subtest menu after the test is complete. Use the up and down arrow keys to move the cursor to “ERROR STOP”.

Use the right and left arrow keys to move the cursor to the desired option and press Enter.

3-6 QOSMIO F10 Maintenance Manual (960-498)