Toshiba qosmio f10 manual Floppy Disk Test Tests and Diagnostics

3.10 Floppy Disk Test 3 Tests and Diagnostics

3.10 Floppy Disk Test

CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD because the contents of the floppy disk will be erased.

To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen.

1.The following message will appear. Select the media mode and start track to be tested and press Enter.

Test start track (Enter:0/dd:00-79) ?

2.The Floppy Disk test contains five subtests that test the FDD.

The floppy disk test menu will appear after you select FDD test parameters.

FLOPPY DISK XXXXXXX

XXXDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end

[Ctrl]+[C] : key stop

SUB-TEST	: XX
PASS COUNT	: XXXXX	ERROR COUNT	: XXXXX
WRITE DATA	: XX	READ DATA	: XX
ADDRESS	: XXXXXX	STATUS	: XXX

SUB-TEST MENU :

01 - Sequential read

02 - Sequential read/write

03 - Random address/data

04 - Write specified address

05 - Read specified address

99 - Exit to DIAGNOSTIC TEST MENU

3-22 QOSMIO F10 Maintenance Manual (960-498)