2.4 System Board Troubleshooting | 2 Troubleshooting Procedures |
Procedure 3 Diagnostic Test Program Execution Check
Execute the following tests from the Diagnostic Test Menu. These tests check the system board. Refer to Chapter 3, Tests and Diagnostic, for more information on how to perform these tests.
1.System test
2.Memory test
3.Keyboard test
4.Display test
5.Floppy Disk test
6.Printer test
7.Async test
8.Hard Disk test
9.Real Timer test
10.NDP test
11.Expansion test
12.
13.Wireless LAN test
14.LAN/Modem/Bluetooth/IEEE1394 test
15.Sound test
16.Only one test
If an error is detected during these tests, go to Procedure 4.
Procedure 4 Replacement Check
The system board may be damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and replace the system board with a new one.
QOSMIO F10 Maintenance Manual |
