Sharp AR-162S operation manual Safety Precautions

Page 2

FOR YOUR RECORDS ...

To protect against loss or theft, record and retain for reference the copier’s serial number located on the back of the unit.

Model Number	AR-162S
Model Number
Serial Number
Date of Purchase

Place of Purchase

Authorized Sharp Copier

Service Department Number

CAUTIONS

Follow the cautions below when using this copier.

●The fusing area is hot. Exercise care in this area when removing misfed paper.

●Do not look directly at the light source. Doing so may damage your eyes.

●The socket-outlet shall be installed near the equipment and shall be easily accessible.

●Place the copier on a firm, level surface.

●Do not install the copier in a humid or dusty location.

● When the copier is not used for a long time, for example, during prolonged holidays, turn the power switch off and remove the power cord from the outlet.

●When moving the copier, be sure to turn the power switch off and remove the power cord from the outlet.

●Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat dissipation, damaging the copier.

●Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser radiation exposure.

SAFETY PRECAUTIONS

This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below.

●Do not remove the cabinet, operation panel or any other covers.

●The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots.

Image 2

Contents AR-162S Safety Precautions Contents Introduction Conventions used in this manualMain Features Part Names and Functions Part Names and Functions Paper Size indicators Interrupt key and indicator pZoom indicator p.17 Alarm indicatorsOriginal Size Enter key and indicators Start key and indicatorPreset Ratio selector keys and indicators Auto Image key and indicatorCopier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Press the Start key and then the Paper Size Enter key Auditing Accounts Enter your account number using the numeric keysWhen copying is completed, press the Audit Clear Key Normal Copying Turn the power switch onAdjust the copy density Normal Copying How to remove the platen coverSet the number of copies using the numeric keys Press the Start keyPress the Auto Image key REDUCTION/ENLARGEMENT/ZOOMAutomatic Set the number of copies Press the Start keySet the number of copies and press the Start key REDUCTION/ENLARGEMENT/ZOOMManual Bypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying Press the copy ratio display key XY ZoomPress the XY-ZOOM key Use the Preset Ratio selector , keys and zoom XY ZoomReverse Press the B/W Reverse key Check the copy paper sizeDual page Copy Press the Dual page Copy keyStart key to resume copying Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyPush the toner cartridge lock release lever and pull Remove the new toner cartridge from the bag. GraspPress the light key Toner Cartridge ReplacementToner cartridge life Misfeed in the copier Misfeed RemovalMisfeed in the bypass tray First confirm the misfeed locationRotating knob in the direction of the arrow to assist Misfeed RemovalCarefully remove the misfed paper. Turn the roller Removing itMisfeed in the transport area Misfeed in the paper tray Close the side cover by pressing the handle on CoverMaintenance Required Developer RequiredProgram No Program name Description User ProgramsList of user programs User Programs Setting the user programsEnter a program number using the numeric keys Program name Program NoSelect the desired parameter using the numeric keys Program name ParametersEnter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 keyProgram No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Bypass tray paper feed roller User MaintenanceOriginal table and platen cover User Maintenance Transfer charger cleaningProblem Solution Copier TROUBLE?Copier TROUBLE? Self-diagnostic function ExampleSupplies Types and sizes of copy paperProper storage SuppliesGenuine supplies statement Store the supplies in a location that isSpecifications Specifications Optional Equipment Part Names SpecificationsSingle Pass Feeder AR-SP2 Equipmentoptional Single Pass Feeder AR-SP2 Misfeed removalIndex Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsRoutes of Entry Ingredients CAS No ProportionOther Limits Skin? Ingestion?None required under normal use Memo Memo Page Sharp Corporation

Related manuals

Manual 68 pages 5.92 Kb