Sharp AR-162S Misfeed Removal, Carefully remove the misfed paper. Turn the roller, Removing it

Page 33

MISFEED REMOVAL

Check the misfeed location. Remove the misfed paper

2 following the instructions for each location in the illustration below.

If paper is misfed here, proceed to “B. Misfeed in the fusing area”.

If the misfed paper is seen from this side, proceed to “C. Misfeed in the transport area”.

If paper is misfed here, proceed to “A. Misfeed in the paper feed area”.

	A.	Misfeed in the paper feed area
	1	Push gently on both sides of the front cover and open it.
		Carefully remove the misfed paper. Turn the roller
Roller rotating knob	2 rotating knob in the direction of the arrow to assist in

removing it.

The fusing unit is hot. Take care in removing paper.

Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies.

Close the front cover by pushing both sides with your

3 hands and then close the side cover by pressing the handle on the cover.

●The misfeed ( ) indicator will go out.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

B. Misfeed in the fusing area

1 Push gently on both sides of the front cover and open it.

INDICATORSSTATUS

Misfeed removal

31

Image 33

Contents AR-162S Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Zoom indicator p.17 Interrupt key and indicator pPaper Size indicators Alarm indicatorsPreset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Image key and indicatorDo not install your copier in areas that are Copier InstallationDo not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key Enter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Adjust the copy densityNormal Copying Set the number of copies using the numeric keys How to remove the platen coverNormal Copying Press the Start keyAutomatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image key Set the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualSet the number of copies and press the Start key Unfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display key XY Zoom Use the Preset Ratio selector , keys and zoomPress the B/W Reverse key Check the copy paper size ReversePress the Dual page Copy key Dual page CopyInterrupting a Copy RUN Press the Interrupt keyStart key to resume copying Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModeRemove the new toner cartridge from the bag. Grasp Push the toner cartridge lock release lever and pullToner Cartridge Replacement Toner cartridge lifePress the light key Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier First confirm the misfeed locationCarefully remove the misfed paper. Turn the roller Misfeed RemovalRotating knob in the direction of the arrow to assist Removing itMisfeed in the transport area Close the side cover by pressing the handle on Cover Misfeed in the paper trayDeveloper Required Maintenance RequiredUser Programs List of user programsProgram No Program name Description Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoProgram name Parameters Select the desired parameter using the numeric keysSettings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Program No Account number change Press and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode User Maintenance Original table and platen coverBypass tray paper feed roller Transfer charger cleaning User MaintenanceCopier TROUBLE? Problem SolutionCopier TROUBLE? Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isSpecifications Specifications Optional Equipment Specifications Single Pass Feeder AR-SP2Part Names Equipmentoptional Misfeed removal Single Pass Feeder AR-SP2Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable LimitsOther Limits Ingredients CAS No ProportionRoutes of Entry Skin? Ingestion?None required under normal use Memo Memo Page Sharp Corporation

Related manuals

Manual 68 pages 5.92 Kb