E. Specifications setup
Use simulation
SIM No |
| Content | |
26 |
| 6 | Used to set the destination. |
After completion of destination settings, change the set values to customize the following settings.
| SIM No | Content | |
26 |
| 3 | Used to set the auditor specification mode. |
|
| 5 | Used to set the count mode of the total counter and |
|
|
| the maintenance counter. |
|
| 18 | Used to set YES/NO of the toner save mode (Only |
|
|
| in UK and Japan versions) |
|
|
| * For other destination versions, this setup is |
|
|
| made by the user program. |
|
| 52 | Used to set YES/NO of counting when |
|
|
| paper is passed through each counter. |
|
| 53 | Used to set YES/NO of user calibration permission. |
|
| 65 | Used to set the limit number of sheets for stapling. |
3.Image quality check
A. Execution items
Execute the following items.
No. | Item | SIM |
1 | Print engine image distortion adjustment (Manual | |
| adjustment) / OPC drum phase adjustment |
|
| (Automatic adjustment) / Color registration |
|
| adjustment (Automatic adjustment) |
|
2 | Copy color balance and density check |
|
3 | Printer color balance/density check | |
4 *1 | Copy/Printer color balance and density adjustment | |
| (Automatic adjustment) |
|
*1: When a printer option is installed, be sure to execute the above item.
B. Description
(1)Print engine image distortion adjustment (Manual adjustment) / OPC drum phase adjustment (Automatic adjustment) / Color registration adjustment (Automatic adjustment)
This adjustment performs the print engine image distortion adjust- ment, the OPC drum phase adjustment, and the color registration adjustment simultaneously.
1)Enter
ǂǂǂ ǂǂ
EXECUTE | Adjustment completed |
|
ǂǂǂ ǂǂ
Abnormal end
ǂǂǂ ǂǂ