Sharp MX-2314N, MX-2614N Installing use conditions, Transportation space, Installing space

Page 2

Transit, Installation (using) environment, Note

1. Installing (use) conditions

Before installing the machine, check that the following installing (use) conditions are satisfied.

(3)Power frequency, waveform

ρThe frequency must be within the range of the specified frequency 2%. If power waveform is deformed, a trouble may occur.

If the installing (use) conditions are not satisfied, the machine may not display full performances, resulting in troubles. It may also cause safety problems. Therefore, be sure to arrange the installing (use) conditions before setting up the machine.

No.

Content

1Transportation space

2 Installing space

3 Power source (Capacity, fluctuation, safety)

4 Floor strength

5 Direct rays of the sun, dust, temperature, humidity, gases, chemicals

A.Transportation space

For installation of a large size machine, be sure to check that the door size is wide enough before bringing in.

B. Installing space

The following space must be provided around the machine in order to assure machine performances and proper operations.

If any option is installed, provide the additional space for installing it.

Adequate space must be provide behind the machine for proper ventilation heat and dust. If not, the machine cannot exhibit func- tions against heat and dust, causing some troubles.

11-13/16"

(30CM)

11-13/16"

17-23/32"

(30CM)

(45CM)

C.Power source (Capacity, voltage, frequency, safety, plug)

If the power specifications are not satisfied, the machine cannot exhibit full performances and may cause safety trouble.

Strictly observe the following specifications.

(1) Power capacity

Check that the following power capacity is satisfied. If not, addition- ally provide a power source.

Current capacity

Japan: 20A or more

EX 100V: 15A or more

EX 200V: 10A or more

Check the shape of the power plug of the machine, and insert it into a power outlet of the acceptable shape.

(2) Power voltage

Measure the voltage during copyingρ to check that the voltage is in the range of the specified voltage 10%.

If the voltage is outside the specified range, please have a certified electrician upgrade the outlet.

(An electrical work is required.)

Use of a step-up transformer is also available. In this case, the capacity must be great enough for the max. power consumption of the machine.

(4)Safety

Be sure to properly ground the machine.

Grounding (earth connection) must be performed before inserting the power plug into the power outlet.

When disconnecting the earth connection, be sure to disconnect the power plug from the power outlet in advance.

(5)Power plug

Check the shape of the power plug of the machine, and insert it into a power outlet of the acceptable shape.

Power plug stated in power capacity.

D. Floor strength and level

This machine is considerably heavy and becomes heavier with an option installed.

The floor must be strong enough to safely support the weight of the machine as well as any installed options.

If the unit is not horizontally installed, the toner density control is not performed normally, degrading the copy quality.

If not, color shift or image distortion may occur.

To assure proper Image quality, make sure the machine is setting level.

E.Direct rays of the sun, dust, temperature, humidity, gasses, chemicals, vibration

(1)Temperature and humidity (Environmental conditions)

This machine is designed to perform properly under the specified temperature and humidity. If the temperature and humidity exceeds the specified range, the machine may not operate properly and or cause equipment failure.

Especially when the humidity is too high, paper absorbs humidity to cause a paper jam or dirty copy.

Do not install the machine near a heater, a cooler, or a humidifier.

Condensation may form inside the machine causing multiple trou- bles. Use enough care for ventilation.

MX-3114N Transit, Installation (using) environment, Note - i

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model MX-3114N Power source Capacity, voltage, frequency, safety, plug Installing use conditionsInstalling space Transportation spaceGases and chemicals ContaminatesDirect sunlight VibrationDelivery Implements, facility, and manpowerTransit and delivery Unpacking Fixing tape and protection material removal UnpackingPacked items check Lock releaseInstallation Developer installationPage Set the control level for the reference toner density Color toner cartridge positions CleaningCleaning of LSUs dust-proof glass and PTC wire Tray size setup Paper feed tray setupSystem setting DescriptionImage quality check Specifications setupSIM No Content Execution itemsDisplay Content Default Main FCopy color balance and density check MethodColor copy check items Adjustment items Color copy check items Check to confirm the followingMonochrome copy check items Check to confirm the following Printer color balance/density check CMY blendǂǂǂ Printer Calibration ǂǂǂ ǂǂ
Related manuals
Manual 16 pages 25.09 Kb

MX-2314N, MX-3114N, MX-2614N specifications

The Sharp MX-2314N, MX-2614N, and MX-3114N multifunction printers are part of Sharp’s acclaimed Advanced Series, designed to meet the needs of busy office environments. These models emphasize high-quality printing, advanced connectivity options, and user-friendly features, making them ideal for small to medium-sized businesses.

Starting with the printing capabilities, all three models deliver impressive output quality, with vibrant colors and sharp detail, thanks to the advanced print technology employed in their construction. The MX-2314N offers print speeds of up to 23 pages per minute, while the MX-2614N and MX-3114N can reach speeds of 26 and 31 pages per minute, respectively. This ensures efficient document production, minimizing wait times during heavy printing tasks.

These devices also incorporate a range of advanced features. Each model supports automatic duplex printing, reducing paper waste and operational costs. The MX-3114N stands out with its additional finishing options, including stapling and hole-punch capabilities, providing versatility for various document formats.

Connectivity is another strong aspect of the Sharp MX series. All three models support standard USB and network printing, as well as mobile printing solutions such as Apple AirPrint and Google Cloud Print. The integration of Sharp’s OSA technology allows businesses to customize their workflows and connect seamlessly with other business applications.

In terms of usability, the MX-2314N, MX-2614N, and MX-3114N feature intuitive touch-screen interfaces that simplify navigation and enhance the user experience. These touch screens are designed to be user-friendly, enabling quick access to functions such as scanning, copying, and faxing.

Security is a priority for Sharp, and these models come equipped with various security features to protect sensitive information. Secure print functionality, user authentication, and encryption options help safeguard data and maintain compliance with industry regulations.

In summary, the Sharp MX-2314N, MX-2614N, and MX-3114N multifunction printers offer a blend of high-speed performance, advanced connectivity options, user-friendly interfaces, and robust security features. These characteristics make them excellent choices for organizations looking to enhance their productivity while maintaining high standards in print quality and operational efficiency. Whether for basic printing tasks or more complex document requirements, these models rise to the occasion, supporting the dynamic needs of modern businesses.
Top Page Image Contents