OPERATION
USING THE C 715 – CD mode
ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO
REVIEW PROGRAM LIST
1Initiate review of your programmed entries by pressing [PROGRAM] at STOP mode.
2The VFD will show the first Program Number.
3Press [PROGRAM] repeatedly to step through the program sequence. You will have reached the end of the program sequence when
EDIT PROGRAM LIST
1Initiate editing of your programmed entries by pressing [PROGRAM] at STOP mode.
2The VFD will show the first Program Number.
3Press [PROGRAM] repeatedly to step through the program sequence. Stop at the program sequence you want to edit.
4To change the programmed track/file of a particular sequence, use the
DELETE PROGRAM
1To delete a particular programmed track/file, press repeatedly [PROGRAM] key in STOP mode until the desired programmed sequence is reached. Press SR 7’s [CLEAR] key once and the track/file in the particular sequence is deleted. The program sequence will adjust accordingly as a programmed track/file is deleted.
2To clear the program memory, perform any of the following steps
•Press [OPEN] to open the disc tray.
•Press [PROGRAM] at stop mode and then press and hold SR 7’s [CLEAR] key until the unit reverts to the default display, i.e. total track number and playback time.
DEUTSCH NEDERLANDS SVENSKA
РУССКИЙ
5Press [PROGRAM] again to continue with other program track changes or press [STOP] to end the editing.
12