Official Manual for NAD C 715 CD Player

OPERATION

USING THE C 715 – TUNER mode

Listening to AM/FM

Tuning MODE

The C 715’s internal AM/FM tuner offers very high quality sound from radio

Toggle front panel’s [TUNE MODE/SELECT] button (or SR 7’s [MEMORY/

broadcasts. The reception and sound quality will always be dependent to a

SELECT] key) and the upper display will show [Manual Tune], [Auto tune]

degree however on the type of antenna(s) used as well as proximity to the

and [Preset tune].

broadcast origin, geography and weather conditions.

Manual tune

Selecting AM/FM

Press [

] on the front panel (or SR 7’s [TUNE

])

Press [SOURCE] button repeatedly until AM/FM/DAB mode.

momentarily to step up or down between AM or FM frequencies. Release

the button when you find your desired station.

Auto tune

Press [

] (or SR 7’s [TUNE

] key) - the C 715 will stop

at the next sufficiently strong signal it encounters. Pressing [ /

Toggle the [BAND] button to select AM or FM band.

] during the search process will stop the search.

Preset tune

Use the [

] on the front panel to step up or down

between presets. Press and hold [

] to scroll

continuously up or down. The SR 7’s [TUNE

] key work similarly. Empty

presets will be skipped during tuning.

ENGLISH

FRANÇAIS

ESPAÑOL

About Antennas

Connect the supplied lead-type FM antenna to the FM antenna input. Extend the lead. Experiment freely with your antenna placement and orientation until you get the clearest sound and lowest background noise. Fix the antenna in the desired position by using thumb tacks, push pins or any suitable means. In areas of poor FM reception, an exterior FM antenna can improve performance dramatically. If radio listening is important to you, consider consulting an antenna installation professional to optimize your system.

The supplied AM ‘loop’ antenna will usually provide adequate reception. However, an exterior AM antenna can be used to improve reception. Consult an antenna professional for more information.

Setting Radio Presets (AM / FM / DAB)

The C 715 can store up to 30 FM, 30 AM and 10 DAB stations for immediate recall.

MANUAL PRESET

1Toggle the [BAND] button to select AM, FM or DAB.

2To store a radio preset, first tune the desired frequency (see above), then press SR 7’s [MEMORY] key.

ITALIANO

DEUTSCH

ASSEMBLING THE LOOP ANTENNA

1 Rotate the outer frame of the antenna.
	“CH _ _” starts blinking indicating that it is waiting for you to enter your
	desired preset number allocation. Use the Direct-Entry numeric keypad
	buttons to enter the desired preset number. For example, to enter
	Preset number “1,” press “0” and then “1”. Note that the as the first digit “0”
2 Insert the bottom edge of the outer frame	is keyed-in, “CH0 _” is blinking indicating that it is waiting for the second
into the groove on the stand.	digit to be entered. Upon entering the second digit (i.e., number
	“1”), “CH01” stops blinking. This indicates that the first preset entry is
	completed.
	The same condition applies for DAB mode with “01” of the displayed
	“PRESET MEMORY 01” blinking also.
	3 Repeat steps 2 and 3 to store up to 30FM, 30AM and 10 DAB stations.
3 Extend the antenna cord.
	NOTE
	A new station can be directly entered into an existing programmed
	Memory Preset. The new station will overwrite all the data previously
	held on that Preset number.

NAD Explore the Features and Operation of the C 715 CD Player