ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH NEDERLANDS SVENSKA
РУССКИЙ
REFERENCE
SPECIFICATIONS
Amplifier Section
Power output Stereo Mode | 25W (6 ohms within rated distortion, 1kHz) |
IHF dynamic power (6 ohms) | 28W |
Total harmonic distortion at rated power | 0.15% |
Damping factor (6 ohms) | >102 |
Input sensitivity and impedance (Tape IN) | 370mV/27kΩ |
Frequency response | +1 |
Signal/noise ratio, | 95dB (Ref. rated power/ 6 ohms |
Signal/noise ratio | 80dB (Ref. 1W / 6 ohms |
TUNER SECTION
AM SECTION |
|
Tuning range | 520kHz |
| 522kHz |
Usable sensitivity | 60dBuV |
S/N ratio | 40dB |
Total Harmonic Distortion | 1.5% |
Selectivity | 25dB |
Frequency response | |
FM SECTION |
|
Tuning range | 87.50MHz – 108MHz (50kHz steps) |
Usable sensitivity, MONO | 10dBuV |
S/N Ratio MONO | 60dB |
S/N Ratio STEREO | 55dB |
Total Harmonic Distortion, MONO | 0.3% |
Total Harmonic Distortion, STEREO | 0.5% |
Frequency response | |
Channel Separation | 35dB |
RDS decode sensitivity | 29dBuV |
DAB SECTION |
|
Tuning range | Band III 174MHz – 240MHz |
Maximum signal | |
Sensitivity | |
Adjacent Channel Rejection | |
Audio Output Stereo | |
optical S/PDIF | 24 bit sample resolution |
| 48kHz sample rate |
|
|
CD SECTION |
|
output level | 1.16V |
Frequency response (ref. 0dB 1kHz, | +1dB |
Total harmonic distortion (ref. 1kHz, VIDEO OUT) | 0.04% |
Signal/Noise ratio | 100dB |
Channel balance (ref. 0dB 1kHz) | 0.5dB |
Dynamic range | 82dB |
Channel separation | 78dB (1kHz) |
| 78dB (10kHz) |
|
|
PHYSICAL SPECIFICATIONS |
|
Dimensions (W x H x D) | 213 x 103 x 324 mm (Net) |
| 213 x 116 x 362 mm (Gross) |
Net weight | 4.5kg |
Shipping weight | 6.0kg |
Note: Gross dimensions include feet, extended buttons and rear panel terminals. |
|
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest information about C 715 DAB.
26