SPECIFICATIONS
Machine specifications / copier specifications (Continued)
| Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", | ||
| |||
| |||
| detection function. Entry of paper sizes up to 297 mm x 432 mm | ||
| possible.) |
| |
| Paper weights: |
| |
Bypass tray | Thin paper (55 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.)), plain paper (60 g/m2 to 105 g/m2 (16 lbs. to | ||
| 28 lbs.)), heavy paper (106 g/m2 to 256 g/m2 (28 lbs. bond to 140 lbs. index)), | ||
| envelopes (75 g/m2 to 90 g/m2 (20 lbs. to 24 lbs.)) | ||
| Paper capacity: Standard paper 100 sheets | ||
| Paper types: |
| |
| |||
| transparency film, envelopes (Monarch, | ||
| Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", | ||
Duplex module | |||
Paper weight: Plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)), heavy paper (106 g/m2 to | |||
| 209 g/m2 (28 lbs. bond to 110 lbs. index)) | ||
| Paper types: | ||
| Output method: | ||
Output tray (Center tray) | Output capacity: 500 sheets (using | ||
(The maximum number of sheets that can be held varies depending on ambient conditions in the | |||
| installation location, the type of paper, and the storage conditions of the paper.) | ||
| Tray full sensor: Yes |
| |
| LAN connectivity: | ||
| USB connectivity: Type A connector supports USB 2.0* | ||
Interface port | Compatibility requirements of USB memory | ||
Memory capacity : Max. 32 GB | |||
| |||
| Disk Format | : FAT32 only | |
| Type B connector supports USB 2.0 (Hi speed) | ||
Required power supply | Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of | ||
the left side of the machine.) |
| ||
|
| ||
Power consumption | |||
Dimensions | 620 mm (W) x 670 mm (D) x 950 mm (H) | ||
Weight | Approx. 116 kg (255.8 lbs.) |
| |
Overall dimensions | 970 mm (W) x 670 mm (D) | ||
|
|
|
*Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors); however, the connectors cannot be used simultaneously. Only one of the connectors can be used. If you need to change the connector that is used, contact your service technician.
To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed 500 mA.
9