PDP2030_35 EN 3/22/04 10:20 AM Page 12
CD Player
CD Player
EN Resume
When you power off the unit (without disconnecting power supply), resume is automatically activated. It stores the following settings and modes: Mode (Repeat/Repeat All/ Random) and EQ setting (Bass Boost). When play mode is on again, the unit resumes to the original settings.
To automatically store current track when you stop CD playback, press stop button twice.
Skip /Search
Press 
to skip to the previous track. Press and hold to search backward in a track.
Press 
to skip to the next track. Press and hold to search forward in a track.
Pause
During playback, press play/pause 
on the main unit to pause playback. The minutes and seconds flash when interrupt- ed.
Stop
Press stop 
on the main unit.
Bass Boost / EQ. setting
Press bass boost 
repeatedly to select NORMAL, DBBS, ROCK, JAZZ, POP and LIVE.
Note:
To prevent excessive bat- tery consumption, the unit
switches off automatically in all modes after 30s if no key has been activated.
Program
This function lets you listen to the tracks you selected in the order you want. You can program up to 30 tracks. The CD player must be in Stop mode.
1.Press program to enter program mode. P icon will flash in the display.
2.Press folder + / - to select a folder. (mp3 disc only)
3.Press 
or 
to select a track to store.
4.Press program to confirm your selec- tion.
5.Repeat steps 2 and 3 to store another track.
6.Press play/pause 
to listen to your programming.
Select all files in a folder
1.Press program to enter program mode. P icon will flash in the display.
2.Press folder + / - to select a folder. (mp3 disc only)
3.Press mode to select all files in the cur- rent folder.
4.Press program to confirm your selec- tion.
5.Press play/pause 
to listen to your programming.
Cancel Program | EN |
To cancel your program, press and hold the mode key when you are in the stop mode or program mode. ERASE will appear in the display. The program will be automatically cancelled. (Program will also be cancelled when you change disc.)
Enter / Exit Program mode
To enter or exit program mode, press program in stop mode.
Lock
Slide control switch on the main unit to HOLD position to lock the button on the main unit to avoid accidental activation of unwanted functions.
“HOLd” will show on the display when the control is locked.
Note:
Remember to slide the control switch to ON posi-
tion to activate the control again.
7 |
|
|
| 8 |