Sharp AR-203E manual Outline of Button Manager, Contents 20 Index

Page 22

3 Outline of Button Manager

Button Manager is a utility software to link scanning functions to the SCAN key on the unit. This software enables you to set scanning functions to six different scan menus, which will be linked to the SCAN key on the unit.

Reference: To begin scanning using the unit's operation panel, settings must be established in the Control Panel after the Button Manager is installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's operation panel, see "USING THE SCANNER MODE" in the Operation Manual.

The functions of Button Manager are shown below.

Tab

Click to set scan menu options.

"Scan Setup" area

Set the scan conditions.

Some applications may limit your choice

Note of settings.

"OK" button

Click to save your settings, and exit the dialog box.

"Cancel" button

Click this button to exit the dialog box without making any changes to the settings.

"Application Selection" area

Select the start-up application here.

Show TWAIN setting screen when scanning

You can select whether or not the TWAIN screen is shown. When the checkbox is selected, the TWAIN screen appears when scanning is executed to let you adjust the scanning conditions.

"Help" button

Click this button to display the help file for Button Manager.

"Apply" button

Click to save your settings without closing the dialog box.

You can specify and change your six scan menu options from five functions. Refer to Button Manager Settings to specify and change the scan menu options.

Close the source application before using the SCAN key on the unit.

Note

Image 22
Contents AR-203E Online Manual Contents How to Control the Online Manual How to Use the Online ManualContents How to Print Out the Online ManualContents 2 Index Printing OverviewMake sure that Sharp AR-xxxx is selected as Contents 3 IndexBasic Printing Current printer. If you intend to change any printWindows 2000/XP/Vista Windows 98/MePrinter Driver Settings Contents 5 IndexContents 6 Index Printing a WatermarkFitting the Printed Image to the Paper Printing Multiple Pages on One Contents 9 Index Outline of the Print Status WindowFlow chart shown below provides scanning overview Scanning OverviewContents 11 Index Scanning Position menu, select Select Acquire Image from the File menu, orClick the Acquire button Position in which you placed the original in StepContents 13 Index Set-up screenContents 14 Index Contents 15 Index Contents 16 Index Contents 17 Index Contents 18 Index Contents 19 Index Click the Finish buttonContents 20 Index Outline of Button ManagerButton Manager Settings Contents 21 IndexIdentifying Unit Problems Contents 22 IndexIf the USB cable becomes disconnected Contents 23 IndexCheck 2 Is the interface cable connected securely? USB cableCheck 1 Is there enough computer memory or hard disk space? Contents 24 IndexCheck Your Computer Check 2 Is your hard disk fragmented?Install the software, referring to Installing Contents 25 IndexWhen you make sure that the USB port is enabled Click the icon beside the Universal Serial BusContents 26 Index Contents 27 Index Faint, Uneven or Smeared Print OutputCheck 2 Is the orientation of document setting correct? Contents 28 IndexCheck 3 Is the paper loaded correctly? Nothing Prints Check 2 Is the on Line indicator off?Check 4 Has the printer driver been installed properly? Check 1 Has a paper jam occurred?Check 2 Have you specified a suitable resolution? Contents 30 IndexCheck 1 Is the original clean? Poor Scanning ResultCheck 1 Have you placed the original straight? Contents 31 IndexScanned Image is Incorrectly Positioned Check 3 Have you set the original correctly on the SPF?Contents 32 Index Unable to Scan the ImageClick Add or Remove Programs Contents 33 IndexRestart your computer Printer Driver Features part Tab Setting Selections Initial settingContents 35 Index Image AdjustmentIndex TwainAR203Ev1
Related manuals
Manual 81 pages 3.42 Kb Manual 81 pages 19.56 Kb