Sharp AR-203E manual Button Manager Settings, Contents 21 Index

3 Button Manager Settings

After being installed, Button Manager normally keeps active under the Windows operating system. Follow the steps shown below to set scan options as you like.

For details on the settings in the setting screen of Button Manager, see Button Manager Help.

1 Rightbar. -click the Button Manager icon () on the task

If the Button Manager icon does not appear on the task bar, click the "start" button, select "All

Programs" ("Programs" on Windows 98/Me/2000), Note select "SHARP Button Manager S", and then click

"Button Manager" to start Button Manager.

	2	Select "Settings" from the displayed pop-up menu.
		The setting screen of Button Manager will open.
Reference: Outline of Button Manager
	3	Click the tab of the scan menu you want to set up.

4	Set up the start-up application in the "Application
	Selection" area.

zWhen the "Show TWAIN setting screen when

	scanning" checkbox is selected, the scan
Note	setting screen appears when scanning is
	executed to let you adjust the scanning
	conditions.

zIf an application other than "Sharpdesk" is selected in the "Application Selection" area, only one original can normally be scanned. If "Sharpdesk" is selected, multiple originals loaded in the SPF can be scanned in a single operation.

Reference: Outline of Button Manager

5	Set up the "Color Mode", "Edge" and other scan
	settings in the "Scan Setup" area.

Reference: Outline of Button Manager

6

Click the "OK" button.

You have completed the settings.

CONTENTS 21 INDEX