NAD T762 owner manual Rear Panel

Page 12

REAR PANEL

ATTENTION!

Please make all connections to your T 762 receiver with the unit powered off or unplugged. (It is also advisable to power-down or unplug all associated components while making or breaking any signal or AC power connections.)

1FM & AM ANTENNA: The supplied wire “dipole” FM antenna will connect to the FM connector using the supplied “balun” adapter. It will usually work best when mounted on a vertical surface such as a wall, with arms fully outstretched forming a horizontal “T” perpendicular to the origin point of the signal. Experiment with placement and orientation of to yield the clearest sound and lowest background noise. In areas of difficult FM reception an external FM antenna can yield dramatic gains in quality; consult your NAD audio specialist or a professional antenna installer.

The AM loop antenna supplied with the T 762 (or a suitable replacement) is required for AM reception. Open the clip terminal lever, insert the wire and close, ensuring that the lever locks the wire in place. Testing different positions for the antenna may improve reception; vertical orientation will usually produce the best results. Antenna proximity to large metal objects (appliances; radiators) may impair reception, as will attempts to lengthen the wire to the loop.

NOTE: An external AM antenna can improve long-distance reception substantially; consult your NAD audio specialist or a professional antenna installer. Do not connect anything other than a loop antenna to the AM ANTENNA terminal. Do not remove the AM loop antenna.

2MAIN IN/AUDIO PRE-OUTS/SUBWOOFER OUT: The T 762’s six built-in power amplifier channels will deliver excellent quality with even very demanding, low sensitivity home-theatre speaker systems. However, it is also possible to use the T 762 as a pre-amplifier with external power amplifiers for some or all channels (remove the supplied jumpers) if necessary. Unlike the six full range channels, there is no power amplifier built- into the T 762 for a subwoofer.

Connect the SW output 1, 2 or both to powered (“active”) subwoofers (or to power amplifier channels driving a passive system).

SURR-BACK-R jack will supply the same signal from the surround-back Left channel if the T 762 is so configured (see “Speaker Setup,” below). Either one or both channels are available mono or stereo as per “Speaker Setup”. Connect to one or two channels of an appropriate external power amplifier or other amplified component to furnish amplification for one or two surround back speakers. Your NAD audio specialist will be happy to advise you.

NOTE: Never connect the T 762’s speaker outputs and the speaker outputs of an external amplifier to the same speakers.

3SOFT CLIPPING: Enables NAD’s proprietary Soft Clipping circuitry on all channels. Soft Clipping gently limits the output of the T 762 to minimize audible distortion, even should the receiver be over-driven.

NOTE: Soft Clipping may simply be left on at all times to reduce the likelihood of audible distortion from excessive volume settings. However, for critical listening, to preserve optimum dynamics you may wish to defeat it by setting this switch off.

4MONITOR OUT: Connect to video input of the monitor/television, using quality dual-RCA and/or S-Video cables designed for video signals. In general, the S-Video connection is superior and should be used if your TV/monitor provides the corresponding input.

NOTE: The T 762 “transcodes” S-Video to composite-video signals, so that S-Video signals connected to the DVD, SAT, VCR, and VIDEO 4-6 inputs will be present at both the S-Video and composite MONITOR OUT jacks when any of these inputs is selected. This provides the convenience of requiring only a single video connection (usually S-Video) between the T 762 and the TV/monitor.

5MS OUT (MULTISOURCE OUT): Connect this pre-amp and composite video output to other zones using high-quality patch cables to reduce noise pickup over long distance runs.

6CD: Connect the analog stereo audio output from a CD player or other line-level audio source to this input.

7IR: These mini-jacks accept and output remote-control codes in electrical format, using industry-standard protocols, for use with “IR-repeater” and multi-room systems and related technologies. Consult your NAD audio specialist for more information.

12

Image 12
Contents English Safety Information Explanation of Graphical SymbolsPrecautions InstallationElectric Power MaintenanceDamage Requiring Service Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Getting the Most from the NAD T Thank you for choosing NADUnpacking and Setup WHAT’S in the BOXChoosing a Location About the T R.S., Matrix and Digital SurroundEase of USE IntegrationAbout the HTR 2 System Remote Control UpgradabilityQuickstart Play a DVD MovieFront Panel Digital Input Jack Rear Panel 12V Trigger IN/OUT Setting UP the T Getting StartedDealing with HUM and Noise Input Setup About the ON-SCREEN Displays OSD and FRONT-PANEL ReadoutDisplay the OSD Navigating the OSD and Making ChangesSpeaker Setup Speaker SettingsListening Mode CHANNEL-BALANCE Test SetupCreating Presets Recalling PresetsMain/Zone DSP Decoding Dolby Digital Surround EX DecodingUsing the T Tuning Stations Setting Radio PresetsSelecting Radio Presets Choosing the FM Mute / ModeAbout the T 762S Listening Modes EarsDisplaying the Signal Mode Selecting Listening ModesDTS Adjusting Listening Modes Adjusting Channel Levels on the FLYAdjusting the Tone Controls Using the HTR 2 Remote Control SpecificationsControlling the T Learning Codes from Other RemotesCopy a Command from Another KEY Macro CommandsPUNCH-THROUGH Recording MacrosKEY-ILLUMINATION Timeout Factory ResetDelete Mode Loading CODE-LIBRARIESUsing the ZR 2 Remote Control Trigger SetupSummary of HTR 2 Modes Condition Possible Causes Possible Solutionss Specifications Physical SpecificationsAV Surround Sound Receiver Amplifier SectionNAD

T762 specifications

The NAD T762 is a powerful AV receiver that exemplifies NAD's commitment to high-quality audio and video performance. Designed for home theater enthusiasts, this receiver combines cutting-edge technologies with user-friendly operation, making it a popular choice among audiophiles and casual listeners alike.

One of the standout features of the NAD T762 is its robust amplification system. With a power rating of 60 watts per channel, the T762 can effortlessly drive a variety of speakers, delivering dynamic soundscapes whether you are watching movies, listening to music, or gaming. The receiver employs NAD's proprietary Soft Clipping technology, which allows it to produce clean audio even at higher volumes, minimizing distortion and providing a rich listening experience.

The T762 supports various surround sound formats, including Dolby Digital, DTS, and Pro Logic II, ensuring that users can enjoy an immersive sound environment. With its nine-channel output, the receiver can accommodate multi-room setups and advanced home theater configurations, giving users the flexibility to create their ideal audio landscape.

In terms of connectivity, the NAD T762 offers an extensive array of inputs and outputs, including HDMI, digital coaxial and optical inputs, and multiple analog connections. The inclusion of HDMI greatly enhances compatibility with modern video sources, allowing for high-definition video pass-through and audio return channel capabilities. Users can also benefit from the T762's integrated AM/FM tuner, providing access to a wide range of radio stations.

A key characteristic of the T762 is its easy-to-navigate user interface. The receiver is designed for straightforward setup and operation, with an intuitive on-screen display that guides users through the configuration process. The integrated remote control further simplifies usage, allowing quick access to the receiver's extensive features.

Additionally, the NAD T762 is constructed with high-quality components, ensuring durability and long-lasting performance. Its sleek design makes it an attractive addition to any home theater setup, blending seamlessly with other audio and video equipment.

In conclusion, the NAD T762 stands out as a high-performance AV receiver that offers a blend of power, versatility, and user-friendly operation. With its advanced amplification, support for multiple surround formats, and extensive connectivity options, it remains a solid choice for anyone serious about home audio and video entertainment.