NAD T762 owner manual 12V Trigger IN/OUT

Page 13

REAR PANEL

812V TRIGGER IN/OUT:

TRIGGER IN connects to the 12-volt trigger outputs of compatible components such as power controllers and home automation devices. The TRIGGER AUTO/OFF switch selects the 12V Trigger Input and disables the remote and front panel ON function.

TRIGGER OUT connects to 12V Input of compatible devices (such as amplifiers and projector-lifts) to automate turn on/off or activation. See “Trigger Setup”, your NAD audio specialist also can provide more information on using the T 762’s triggers.

9COMPONENT VIDEO IN 1-3; OUT: Connect the COMPONENT VIDEO IN 1, 2 and 3 inputs to component-video outputs from compatible source components, typically a DVD player and terrestrial or satellite HDTV tuner. Connect the T 762 COMPONENT VIDEO OUT to the component-video input of a compatible video monitor/TV. Be sure to observe consistency in connecting the Y/Cr/Cb jacks (some source and TV components label these Y/Pb/Pr) to the corresponding sources/inputs; do not rely purely on the color-coding of the jacks, which may not always be consistent among brands. The routing of the component-video inputs is fixed: COMPONENT VIDEO IN 1 is routed to the COMPONENT VIDEO OUT jacks when the DVD input is selected; COMPONENT VIDEO IN 2 is selected when the SAT input is active; COMPONENT VIDEO IN 3 is selected when the VCR input is active; the audio and digital inputs assigned to DVD, SAT and VCR will be used (see also, "Input Setup," below).

NOTE: The T 762’s component-video inputs and outputs are fully wide-band, compatible with all HDTV formats. The T 762 does not display its on-screen menus on its component-video output. To use on-screen menus, you will need to make an S-Video or composite connection between the T 762 and the monitor/TV, and select it for menu display.

10DIGITAL IN OPT 1-2; COAX 3-6: Connect to the coaxial S/PDIF-format digital outputs of sources such as CD or DVD players, HDTV or satellite tuners, or other components; connect DIGITAL IN OPT1-2 to optical S/PDIF-format digital outputs.

DIGITAL OUT: Connect the optical and/or coaxial DIGITAL OUT ports to the corresponding S/PDIF digital input of a recording component such as a CD recorder, DAT deck, or computer soundcard. See "Setting Up the T 762", below.

11RS-232:Connect this interface via RS-232 serial cable (not supplied) to any Windows® compatible PC to allow remote control of the T 762 through NAD’s proprietary PC software. See your NAD audio specialist for more information. http://nadelectronics.com/support/upgrades_framset.htm

12SWITCHED AC OUTLET: This convenience jack can supply switched power to another component or accessory. It is powered on and off by the front panel POWER key (or the HTR2’s [On] and [Off] keys).

NOTE: The total draw of all devices connected to this jack must not exceed 120 watts.

13AC POWER INLET: Connect to the supplied IEC-standard removable AC power cord or a compatible cord.

14SPEAKERS A & B: Connect the left and right front, centre, left and right surround, and surround back speaker outputs to the corresponding loudspeakers. Each output’s “+” (red) terminal and “-“ (black) terminal must be connected to the corresponding “+” and “-“ terminals of the loudspeaker. Use extra care to ensure that no stray wires or strands cross between posts or terminals at either end.

Connect Speakers B left and right speaker outputs to the corresponding remote loudspeakers. When speakers B are activated the output is taken from the front left and right channels and any signal source is converted “downmixed” to stereo as indicated in the florescent display.

NOTE: Use stranded wire of at least 16 gauge (AWG); specialized speaker cable may be valuable (consult your NAD audio specialist). Connections to the T 762 can be made with banana-type plugs, or using bare wire, or pins, by loosening the terminal’s plastic nut, making a clean, neat connection, and re-tightening carefully (use the transverse hole through the post for bare-wire or pin connections). To minimize the danger of short-circuits, ensure that only 1/2-inch of exposed wire or pin is employed in connecting.

NOTE: This unit is designed to produce optimum sound quality when connected to speakers with impedances within the receiver’s operating range. Please check front, center, and surround speakers are rated to be 4Ω min. per speaker.

IMPORTANT NOTE: For optimum surround performance, the T 762 speaker settings and levels must be set correctly via the receiver’s setup routines; see “Setting Up the T 762”, below.

15DVD, SAT, VCR, VIDEO 4, VIDEO 5: These comprise the T 762’s principal inputs. Connect S-Video, composite video, and analog stereo audio from source components such as DVD players and HDTV/satellite tuners (see "Input Setup," below). VCR and VIDEO 4 may be used with recording components such as videocassette or DVD-recorders; connect the T 762 S-Video/composite video OUT jacks to these components’ record-inputs. (Note that VCR/VIDEO 4 may freely be used for play-only components, in which case their OUT jacks would remain unconnected.)

16TAPE IN/OUT: Connect the T 762’s TAPE OUT jacks to the stereo analog audio inputs, of an audio recording component such as a cassette deck or CD recorder, or of an outboard analog audio processor such as a stereo equalizer; connect the receiver’s TAPE IN jacks to the component’s corresponding outputs. The signals present at the TAPE IN jacks can be heard by selecting the front panel TAPE MONITOR button, or the HTR 2’s [Tape] (zero) key.

NOTE: The signal present at the TAPE OUT jacks is determined by the source last selected via the front panel Video or Audio keys (or the HTR 2’s input-select keys).

NOTE: Digital input signals are not available at the analog TAPE OUT jacks; they are only available at the DIGITAL OUT jacks.

17DISC: Connect the analog stereo audio output from a second CD player or other line-level audio source to this input.

NOTE: Connecting a phonograph turntable to the T 762 requires an outboard magnetic phono-preamp component such as the NAD PP1; you cannot connect turntable directly to the DISC inputs.

187.1 CH. INPUT: Connect to the corresponding analog audio outputs of a multichannel source component such as a DVD-Audio or multichannel- SACD player, or external multichannel decoder. Typically, these sources will produce 5.1-channel output, in which case the SURROUND BACK jacks are left unconnected. The signals present at these jacks may be heard by selecting the front-panel EXT. 7.1 key or the HTR 2’s [Ext 7.1/5.1] button. See “Selecting Sources," below.

NOTE: There is no bass-management or other processing (other than master-volume control) available to this 7.1 CH. INPUT. While the multi- channel audio outputs of a DVD-Video player can be connected to these jacks, using the T 762’s own Dolby Digital and DTS decoding and digital-

analog converters, via a digital connection, will usually produce superior results.

13

 

ENGLISH

Page 12 Page 14
Image 13
Page 12 Page 14
Contents English Explanation of Graphical Symbols Safety InformationPrecautions InstallationMaintenance Electric PowerDamage Requiring Service Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Thank you for choosing NAD Getting the Most from the NAD TWHAT’S in the BOX Unpacking and SetupChoosing a Location R.S., Matrix and Digital Surround About the TEase of USE IntegrationUpgradability About the HTR 2 System Remote ControlPlay a DVD Movie QuickstartFront Panel Digital Input Jack Rear Panel 12V Trigger IN/OUT Getting Started Setting UP the TDealing with HUM and Noise About the ON-SCREEN Displays OSD and FRONT-PANEL Readout Input SetupDisplay the OSD Navigating the OSD and Making ChangesSpeaker Settings Speaker SetupListening Mode CHANNEL-BALANCE Test SetupRecalling Presets Creating PresetsMain/Zone DSP Decoding Dolby Digital Surround EX DecodingUsing the T Setting Radio Presets Tuning StationsSelecting Radio Presets Choosing the FM Mute / ModeEars About the T 762S Listening ModesSelecting Listening Modes Displaying the Signal ModeDTS Adjusting Channel Levels on the FLY Adjusting Listening ModesAdjusting the Tone Controls Specifications Using the HTR 2 Remote ControlControlling the T Learning Codes from Other RemotesMacro Commands Copy a Command from Another KEYPUNCH-THROUGH Recording MacrosFactory Reset KEY-ILLUMINATION TimeoutDelete Mode Loading CODE-LIBRARIESTrigger Setup Using the ZR 2 Remote ControlSummary of HTR 2 Modes Condition Possible Causes Possible Solutionss Physical Specifications SpecificationsAV Surround Sound Receiver Amplifier SectionNAD

T762 specifications

The NAD T762 is a powerful AV receiver that exemplifies NAD's commitment to high-quality audio and video performance. Designed for home theater enthusiasts, this receiver combines cutting-edge technologies with user-friendly operation, making it a popular choice among audiophiles and casual listeners alike.

One of the standout features of the NAD T762 is its robust amplification system. With a power rating of 60 watts per channel, the T762 can effortlessly drive a variety of speakers, delivering dynamic soundscapes whether you are watching movies, listening to music, or gaming. The receiver employs NAD's proprietary Soft Clipping technology, which allows it to produce clean audio even at higher volumes, minimizing distortion and providing a rich listening experience.

The T762 supports various surround sound formats, including Dolby Digital, DTS, and Pro Logic II, ensuring that users can enjoy an immersive sound environment. With its nine-channel output, the receiver can accommodate multi-room setups and advanced home theater configurations, giving users the flexibility to create their ideal audio landscape.

In terms of connectivity, the NAD T762 offers an extensive array of inputs and outputs, including HDMI, digital coaxial and optical inputs, and multiple analog connections. The inclusion of HDMI greatly enhances compatibility with modern video sources, allowing for high-definition video pass-through and audio return channel capabilities. Users can also benefit from the T762's integrated AM/FM tuner, providing access to a wide range of radio stations.

A key characteristic of the T762 is its easy-to-navigate user interface. The receiver is designed for straightforward setup and operation, with an intuitive on-screen display that guides users through the configuration process. The integrated remote control further simplifies usage, allowing quick access to the receiver's extensive features.

Additionally, the NAD T762 is constructed with high-quality components, ensuring durability and long-lasting performance. Its sleek design makes it an attractive addition to any home theater setup, blending seamlessly with other audio and video equipment.

In conclusion, the NAD T762 stands out as a high-performance AV receiver that offers a blend of power, versatility, and user-friendly operation. With its advanced amplification, support for multiple surround formats, and extensive connectivity options, it remains a solid choice for anyone serious about home audio and video entertainment.
Top Page Image Contents