Sharp AR-203E operation manual Press the tray select key to select the multi-bypass tray

•Paper must be fed narrow side into the feed slot.

• Transparency film, labels, envelopes, and other special purpose papers must be fed individually.

•When copying onto transparency film, remove each copy promptly. Do not let copies stack up. When loading an envelope, make sure that it is straight and flat.

3 Press the tray select ( ) key to select the multi-bypass tray. 2

Note for loading envelopes

•Envelopes must be fed narrow side into the feed slot one at a time.

•Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached.

•Envelopes of which the surface is not flat because of embossing may cause the copies/prints to become smudged.

•Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be sealed closed when copied/ printed.

•Use only envelopes which are flat and crisply folded. Curled or poorly formed envelopes may be poorly copied/printed or may cause misfeeds.

•It is recommended that you perform a test copy before performing the actual copied/printed job.

•Be sure to select either Com 10, DL, C5 or Monarch on the paper size setting of the printer driver. (For detailed information on printer driver, refer to the online manual.)

Note for loading thick paper

Copying on thick paper requires higher fusing temperature setting. Set the user program 29 to "2 (High)" when using thick paper. (See page 43 and 44.)

11