Sharp AR-203E operation manual Physical and Chemical Properties

Page 72

 

MATERIAL SAFETY DATA SHEET

 

Page : 3/4

 

 

 

 

Date Issued

: Nov. 1, 2007

 

 

 

 

MSDS No. F-01601

Exposure Limit Values

 

 

 

 

OSHA-PEL(USA)

 

: 15mg/m3 (Total Dust),

5mg/m3 (Respirable Dust)

 

ACGIH-TLV(USA)

 

: 10mg/m3 (Total Dust),

3mg/m3 (Respirable Dust)

 

Personal Protective Equipment

 

 

 

 

Respiratory Protection

: Not required under intended use.

 

 

Hand Protection

 

: Not required under intended use.

 

 

Eye Protection

 

: Not required under intended use.

 

 

Skin Protection

 

: Not required under intended use.

 

 

Other Protective Equipment

: Use of a dust mask and goggles are recommended when handling a large

 

 

quantity of toner or during long term exposure, as with any non-toxic dust.

 

 

 

 

9.PHYSICAL AND CHEMICAL PROPERTIES

 

 

 

 

 

 

 

 

 

Appearance

 

 

 

 

 

Physical State : Solid

Form : Powder

Color : Black

Odor : odorless

 

Ph

 

: Not applicable

 

 

 

Boiling / Melting Point

: Not applicable

 

 

 

Softening Point(°C)

: 100 - 130

 

 

 

Flash Point(°C)

 

: Not applicable

 

 

 

lgnition Point(°C )

 

: > 350

 

 

 

Explosion Properties

: No data

 

 

 

Density(g/cm³)

 

: 1.1 (bulk density : 0.35)

 

 

Solubility in Water

 

: Negligible

 

 

 

 

 

 

 

 

10.STABILITY AND REACTIVITY

 

 

 

 

 

 

 

 

 

 

Stability

 

: Stable

 

 

 

Hazardous Reactions

: Dust explosion, like most finely divided organic powders.

 

Conditions to Avoid

: Electric discharge, throwing into fire.

 

 

Materials to Avoid

 

: Oxidizing Materials

 

 

 

Hazardous Decomposition Products : CO, CO2 and NOX

 

 

 

Further Information

: None

 

 

 

 

 

 

 

11.TOXICOLOGICAL INFORMATION

 

 

 

Acute Toxicity

 

 

 

 

 

Ingestion(oral)

: LD50 > 2500mg/kg [Estimated from the other product containing similar material]

Inhalation

: No data

 

 

 

 

Eye irritation

: Not an irritant [Estimated from the other product containing similar material]

 

Skin irritation

: Not an irritant [Estimated from the other product containing similar material]

 

Skin sensitizer

: No sensitized [Estimated from the other product containing similar material]

 

Mutagenicity

: Negative (Ames Test) [Estimated from the other product containing similar material]

Carcinogenicity

: In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human

 

carcinogen). This classification is given to chemicals for which there is inadequate human

 

evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The

classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.

Image 72
Contents AR-203E Bank drafts Important points when selecting an installation site 20 cmLaser information Store paper in the wrapper and lying flatContents Using the Manual Conventions used in the manualAR-203E Part Names SPF as an optionExposure mode selector key and indicators Operation PanelType of paper Type of media Size Weight Feeding PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Copy Flow Turn on the unit p.13Start copying Connecting the Power Cord Power onPower off methods Initial settings of operation panelAbout the scan head Original Placement Using the original tableSetting a large original Open the original cover, and place the originalUsing the SPF Original feeder trayExposure ADJUSTMENT/PHOTO Copying Exposure adjustmentSET the Copy Quantity Automatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM Selecting the traySet the reduction/enlargement ratio Press the tray select keySoftware MFP driverSharpdesk Button ManagerBefore Installation Installation environment and usable softwareHardware and software requirements Installing the Software Using the machine with a USB connectionDouble-click the setup icon Select Connected to this computer and click the Next button When installing is finished, click the Close button This completes the installation of the software Connecting a USB cable Using the machine as a shared printerInsert the cable into the USB connector on the machine Click the Printer Driver button You will return to the window of . Click the Close button Indicators on the Operation Panel Start indicatorOnline indicator Power save indicatorUsing the Printer Mode Opening the printer driver from the start menuClick Printing Preferences button in the General tab How to print About interrupt copyingUsing the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows XP/Vista Windows 98/Me/2000 Select Sharp AR-xxxx, and click the Properties buttonProperties screen, click Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner Event Using the Scan key to begin scanning Press the Scan keyPress the right copy quantity Application Application launched NumberOpening the scanner driver and scanning from your computer Press the start KeyScan is started Scanning with the Scanner and Camera Wizard in Windows XP Select a name, format, and folder for the scanned imageClick Finish in the screen that appears HOW to USE the Online Manual Toner Save Mode Description of Special FunctionsSetting the user programs User ProgramsPress the light Key to return to the normal copy mode Displaying Total Number of CopiesMaintenance Toner Cartridge ReplacementGently pull the toner cartridge Out while pressing the lockRelease lever Release leverToner Cartridge Life SecondsPress the light key As a percentage 100, 75, 50, 25 or 10 is displayed. WhenCleaning the Unit CabinetTransfer charger Troubleshooting the Unit TroubleshootingStatus Indicators Be sure to use only genuine Sharp parts and suppliesMisfeed Removal Open the multi-bypass tray, and side cover, in that orderPaper feed area. p.55 Misfeed in the fusing area Lower the fusing unit release LeverFusing unit release lever Misfeed in the paper feed areaMisfeed in the transport area Open the front coverRotate the feeding roller Direction of the arrow Gently remove Misfed paper from the exit AreaMisfeed in the lower paper feed area Misfeed in the SPFMaintenance Required Developer RequiredScan Head Locking Switch LockUnlockSystem Configuration Single Pass Feeder AR-SP9AR-SP9 Feed unit AR-D33 Press the copy ratio display % key Using the paper feed unit with the printer function Sheet Paper Feed Unit AR-D33Specifications AppendixSharp GDI Single pass feeder AR-SP9 Sheet paper feed unit AR-D33About Supplies and Options Supply listInterface cable USB interface cableIndex Name Index by Purpose Material Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Transport Information Date Issued Nov.01 Hazards Identification Physical and Chemical Properties Ecological Information Other Countries outside the EU Class Laser Product Laser Klasse Sharp Manufacturing France S.A AR-203Ev1
Related manuals
Manual 81 pages 3.42 Kb Manual 39 pages 3.34 Kb