Sharp AR-203E operation manual Using the SPF, Original feeder tray

Page 18

Using the SPF

The SPF is designed to hold up to 50 originals measuring from A5 to A4 and weighting from 56 to 90 g/m2.

Before feeding originals in the original feeder tray, be sure to remove

any staples or paper clips from them.

Before placing curled or wavy originals into the original feeder tray, be sure to flatten them. If not, original misfeeds may result.

The SPF ( ) indicator on the operation panel will light up. If this indicator does not light up, the originals are not properly set or the SPF is not properly closed.

Badly damaged originals may misfeed in the SPF. It is recommended that such originals be copied from the original table.

Special originals such as transparency film should not be fed through the SPF, but should be placed directly on the original table.

Image loss (max. 4 mm) can occur at the leading and trailing edges of the copies. Also image loss (max. 4.5 mm in total) can occur along the other edges of the copies.

To stop continuous copying using the SPF, press the clear () key.

1

2

Make sure that no original is left on the original table.

Adjust the original guides to the size of originals.

3

Set the originals face up in the

Original face up

 

original feeder tray.

Peep hole

 

Use the peep hole (see the illustration at

 

 

 

right) to check the position of the original.

 

 

There is an original top edge mark U in the

 

 

peep hole. Align the top edge of the original

 

 

with this mark.

 

16

Image 18
Contents AR-203E Bank drafts Important points when selecting an installation site 20 cmLaser information Store paper in the wrapper and lying flatContents Using the Manual Conventions used in the manualAR-203E Part Names SPF as an optionExposure mode selector key and indicators Operation PanelType of paper Type of media Size Weight Feeding PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Copy Flow Turn on the unit p.13Start copying Connecting the Power Cord Power onPower off methods Initial settings of operation panelAbout the scan head Setting a large original Original PlacementUsing the original table Open the original cover, and place the originalUsing the SPF Original feeder trayExposure ADJUSTMENT/PHOTO Copying Exposure adjustmentSET the Copy Quantity Automatic exposure adjustment Set the reduction/enlargement ratio REDUCTION/ENLARGEMENT/ZOOMSelecting the tray Press the tray select keySharpdesk SoftwareMFP driver Button ManagerBefore Installation Installation environment and usable softwareHardware and software requirements Installing the Software Using the machine with a USB connectionDouble-click the setup icon Select Connected to this computer and click the Next button When installing is finished, click the Close button This completes the installation of the software Connecting a USB cable Using the machine as a shared printerInsert the cable into the USB connector on the machine Click the Printer Driver button You will return to the window of . Click the Close button Online indicator Indicators on the Operation PanelStart indicator Power save indicatorUsing the Printer Mode Opening the printer driver from the start menuClick Printing Preferences button in the General tab How to print About interrupt copyingUsing the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows XP/Vista Windows 98/Me/2000 Select Sharp AR-xxxx, and click the Properties buttonProperties screen, click Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner Event Press the right copy quantity Using the Scan key to begin scanningPress the Scan key Application Application launched NumberOpening the scanner driver and scanning from your computer Press the start KeyScan is started Scanning with the Scanner and Camera Wizard in Windows XP Select a name, format, and folder for the scanned imageClick Finish in the screen that appears HOW to USE the Online Manual Toner Save Mode Description of Special FunctionsSetting the user programs User ProgramsPress the light Key to return to the normal copy mode Displaying Total Number of CopiesMaintenance Toner Cartridge ReplacementRelease lever Gently pull the toner cartridgeOut while pressing the lock Release leverPress the light key Toner Cartridge LifeSeconds As a percentage 100, 75, 50, 25 or 10 is displayed. WhenCleaning the Unit CabinetTransfer charger Troubleshooting the Unit TroubleshootingStatus Indicators Be sure to use only genuine Sharp parts and suppliesMisfeed Removal Open the multi-bypass tray, and side cover, in that orderPaper feed area. p.55 Fusing unit release lever Misfeed in the fusing areaLower the fusing unit release Lever Misfeed in the paper feed areaRotate the feeding roller Direction of the arrow Misfeed in the transport areaOpen the front cover Gently remove Misfed paper from the exit AreaMisfeed in the lower paper feed area Misfeed in the SPFMaintenance Required Developer RequiredScan Head Locking Switch LockUnlockSystem Configuration Single Pass Feeder AR-SP9AR-SP9 Feed unit AR-D33 Press the copy ratio display % key Using the paper feed unit with the printer function Sheet Paper Feed Unit AR-D33Specifications AppendixSharp GDI Single pass feeder AR-SP9 Sheet paper feed unit AR-D33Interface cable About Supplies and OptionsSupply list USB interface cableIndex Name Index by Purpose Material Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Transport Information Date Issued Nov.01 Hazards Identification Physical and Chemical Properties Ecological Information Other Countries outside the EU Class Laser Product Laser Klasse Sharp Manufacturing France S.A AR-203Ev1
Related manuals
Manual 81 pages 3.42 Kb Manual 39 pages 3.34 Kb