Sharp PN-E602 Turning Power On/Off, Turning on the main power, Turning power on/off

Page 16

Turning Power On/Off

Caution

•Turn on the monitor first before turning on the PC or playback device.

Turning on the main power

Main power switch

Caution

•The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on.

•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds.

•For a complete electrical disconnection, pull out the main plug.

Turning power on/off

Press the POWER button or POWER switch to turn the power ON/OFF.

	Power LED

Status	Status of the monitor
Green lit	Power on

Orange lit	Power off (Standby mode)

Green flashing	Input signal waiting mode

Caution

•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

TIPS

•When the main power switch is off, the monitor cannot be turned on.

•If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•To disable the logo screen from displaying when turning the power ON, set LOGO SCREEN to OFF on the SETUP menu. (See page 23.)

E16

Image 16

Contents PN-E602 For Customers in U.K GREEN-AND-YELLOWBlue BrownRefer Servicing to Qualified Service Personnel Important InformationInformation on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationDo not place the monitor on a device which generates heat Contents Supplied ComponentsNFront view Part NamesNRear view NRemote control unit Part Names Signal transmitterPower button See Mute button See 11 EConnecting Peripheral Equipment Connection with a PC or AV equipmentConnecting Peripheral Equipment 13 EBinding Cables Connecting the Power CordRemoving the Handles Preparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning on the main powerTurning power on/off Main power switchDisabling power on/off operations NDate/time settingTurning Power On/Off 17 EBasic Operation MuteMenu DisplayBasic Operation NSwitching the screen size 19 EWide Zoom Normal Dot by DotMenu Items Displaying the menu screenNExample of operation NMenu screen display21 E Menu item detailsNSCREEN Menu Items NPICTUREMenu Items NSETUPNAUDIO 23 E NOPTIONNMULTI NPIP/PbyP 25 EMenu Items NDual screen display NZOOM2 Special Setting Setting procedureSet using the Multi menu Menu Items NEnlargePower 27 ENSCHEDULE DAY of the WeekNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 29 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditionsNResponse code format 31 ENID numbers 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 33 ERS-232C command table Power control/Input mode selectionHow to read the command table Command Command field See Direction35 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu 37 E Setup menuControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu Image Position Epos setting 39 EControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu41 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor Default Gateway 0.0 43 ETo set from a PC Controlling the Monitor with a PC LANSee pages 45 to 49 for details on each setting Controlling with a PCBasic operation If the Dhcp Client is set to OFF, specify an IP address45 E Standby mode, Power on is the operation availableInformation about this monitor appears User Name / Password If the Dhcp Client is set to OFF, specify the subnet maskDNS Server Accept IP Address47 E Attach the log file to a TEMPERATURE/HARDWARE error e-mail Recipient E-MAIL AddressesCondition Confirmation49 E Troubleshooting Troubleshooting 51 ESpecifications NProduct SpecificationsNDimensional Drawings SpecificationsNPower management 53 ESpecifications NCompatible signal timing PC NCompatible signal timing AV55 E Mounting Precautions For Sharp dealers and service engineers PN-E602 Mu EN11L1

Related manuals

Manual 2 pages 13.57 Kb