Technicolor - Thomson DPL5000 manual Operating the Radio

Operating your Receiver

Operating your Receiver

Operating the Radio

The receiver has a built-in tuner that allows for AM/FM radio function.

Manual tuning

1.Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details)

2.Press ON/ECO on the main unit or on the remote control to switch on the receiver.

ON/ECO

Automatic Tuning

Press and hold TUNER - or TUNER + for about one second to activate the automatic SEARCH function. The receiver will automatically tune frequencies until it finds a station.

NOTE

1. If there is interference, move the location of

Storing radio stations

The receiver can store up to 40 radio stations in memory. You can enter every single radio station yourself or the receiver can store all available radio stations automatically in an ascending order.

Auto Preset Programming (APP) : (FM only)

1. In Tuner mode, select the FM band by pressing TUNER on the remote control.

3. Press the SAVE button on
the remote control.
"MEMORY" will flash and	EN
a preset number will be
shown on the display.

4. While MEMORY is still flashing on the display,

press PR or PR on the remote control to select the desired preset memory location.

3.Press the SOURCE button repeatedly on the main unit until the tuner mode is selected or press TUNER on the remote control.

SUBWOOFER SOURCE SURROUND

the antenna until the optimal sound is heard.

TV and other electronic devices could be the

cause of interferences so try to position the

antenna away from them.

2. Weak signal can affect the "auto Search

function". Adjust the antenna for better

reception and for a more efficient search.

Select a sound effect if needed by pressing the SURROUND button. (see "Advance sound section" for details).

2.Press and hold the TUNER button on the remote control for 3 seconds. “MEMORY” will be displayed in red and will blink during the automatic storing process.

Radio frequencies will be scanned and radio stations will be stored automatically. When all available radio stations are stored or if all 40 memory locations are full, the auto preset will stop.

NOTE

5. Press the SAVE button on the remote control to store frequency in selected preset location.

6. Repeat steps 1-5 to store other frequencies.

Retrieving preset stations

4.To select between FM and AM band, press the TUNER button repeatedly.

5.Tune to a station by pressing TUNER - or TUNER + repeatedly until the desired station is found.

RCE SURROUND PRESET

VOLUME

PHONES

Selecting Mono or Stereo Sound

Press the ST•MONO button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available).

A Weak signal can affect the "Automatic Preset Storing function" efficiency. Adjust the antenna for the best reception, and a more efficient search.

Manual preset

1.Select FM or AM band by pressing TUNER repeatedly.

2.Tune to the radio station to be stored. (see "Manual tuning" on page 16 above for details)

1.Press TUNER on the remote control to select tuner mode.

2.Press the PRESET + or - buttons on the main unit or the PR or PR buttons on the remote control to select the preset station.

PRESET

VOLUME

PHONES

16 17