Sharp XG-C435X-L Signal Adjustment ÒSIG-ADJÓ Menu, Auto Sync Adjustment, Signal Type Setting

Signal Adjustment (ÒSIG-ADJÓ Menu)

	Pict.	SIG–ADJ	SCR		PRJ	Net.
	Clock		0
1	Phase		0
	H-Pos		0
	V-Pos		0
	Reset
2	Resolution			640 x 480
3	Auto Sync			On
4	Signal Type			Auto
5	Dynamic Range			Standard
6	Video System			Auto
7	Signal Info : 800 x 600
	H	60.3 kHz	/ V	37.8		Hz
	SEL./ADJ.			ENTER
	RETURN			END

1Adjusting the Computer Image

If the optimum image cannot be obtained with Auto Sync adjustment, use the SIG-ADJ function.

Selectable items	Description
Clock	Adjusts vertical noise.
Phase	Adjusts horizontal noise (similar to
	tracking on your VCR).
H-Pos	Centers the on-screen image by
	moving it to the left or right.
V-Pos	Centers the on-screen image by
	moving it up or down.

Note

•To reset all adjustment items, select “Reset” and press ENTER.

•The adjustable range of “H-Pos” (H-Position) and “V-Pos” (V-Position) may vary depending on the screen resolution of the computer.

Menu operation Page 43

3Auto Sync Adjustment

Used to automatically adjust a computer image.

Selectable items	Description
On	Auto Sync adjustment will occur when
	the projector is turned on or when the
	input signals are switched, when
	connected to a computer.
Off	Auto Sync adjustment is not automati-
	cally performed.

Note

•Auto Sync adjustment is also performed by pressing AUTO SYNC on the projector or on the remote control.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

4Signal Type Setting

This function allows you to select the input sig- nal type RGB or Component for COMPUTER/ COMPONENT 1, 2 or DVI-D.

Selectable items	Description
Auto	Input signals are automatically recog-
	nized as RGB or component.
RGB	Set when RGB signals are received.
Component	Set when Component signals are
	received.

2Resolution Setting

Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. How- ever, for some signals, the optimal resolution mode in ÒResolutionÓ on the ÒSIG-ADJÓ menu may need to be selected to match the computer display mode.

Note

•See “Checking the Input Signal” on page 48 for information on the currently selected input sig- nal.

Useful Features

-47