Sharp XG-C435X-L Screen Adjustment ÒSCR-ADJÓ Menu, Setting the Resize Mode, 3Keystone Correction

Screen Adjustment (ÒSCR-ADJÓ Menu)

	Pict.	SIG	SCR-ADJ		PRJ	Net.
1	Resize			Normal
2	Image Shift		0
			0
	H-Keystone
3	V-Keystone		0
	Auto V-Keystone			On
4
	OSD Display			On
5	Background			Logo
6	Menu Position			Center
7	PRJ Mode			Front
8	Language			English

SEL./ADJ.	ENTER
RETURN	END

1Setting the Resize Mode

Note

•For details of the Resize mode, see pages 37 and 38.

•You can also press RESIZE on the remote con- trol to set the resize mode. (See page 37.)

2Adjusting the Image Position

You can move the projected image vertically.

Menu operation Page 43

3Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image be- comes distorted trapezoidally. The function for correct- ing trapezoidal distortion is called Keystone Correction.

Auto V-Keystone Correction

Set ÒAuto V-KeystoneÓ on the ÒSCR-ADJÓ screen menu to ÒOnÓ.

Manual Keystone Correction

Set ÒAuto V-KeystoneÓ on the ÒSCR-ADJÓ screen menu to ÒOffÓ. Select ÒV-KeystoneÓ, and then press \ or to parallelize the left and right sides of the projected image with the slide bar. To parallelize the upper and lower sides, select ÒH- KeystoneÓ and press \ or .

Vertical Keystone Correction

Horizontal Keystone Correction

\ button button

Note

•This function only works in some RESIZE modes. (See pages 37 and 38.)

•To reset this function, select “0”.

Note

•The Keystone Correction can be adjusted up to an angle of approximately ±12 degrees with “Auto V-Keystone” and up to an angle of approximately ±50 degrees with “V-Keystone” and approxi- mately ±30 degrees with “H-Keystone”.

•When the screen is slanting or the image is de- teriorated, set “Auto V-Keystone” to “Off”.

Useful Features

-49