Sharp XG-C465X-L, XG-C435X-L Maintenance, Cleaning the projector, Cleaning the lens

Page 58

Maintenance

Cleaning the projector

■Ensure the power cord is unplugged before cleaning the projector.

■The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet.

■Do not use volatile agents such as insecticides on the projector.

Do not attach rubber or plastic items to the projec- tor for long periods.

The effects of some of the agents in the plastic may cause damage to the quality or finish of the projector.

Mild

detergent

Mild detergent

diluted with water

Cleaning the lens

■Use a commercially available blower or lens clean- ing paper (for glasses and camera lenses) for clean- ing the lens. Do not use any liquid type cleaning agents, as they may wear off the coating film on the surface of the lens.

■As the surface of the lens can easily get damaged, be careful not to scrape or hit the lens.

Cleaning

Paper

Cleaning the exhaust and intake vents

■Use a vacuum cleaner to clean dust from the ex-

haust vent and the intake vent.

Wax

Thinner

■Wipe off dirt gently with a soft flannel cloth.

■When the dirt is hard to remove, soak a cloth in a

mild detergent diluted with water, wring the cloth well and then wipe the projector.

Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projec- tor before use.

Info

• If you want to clean the air vents during projec- tor operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, unplug the power cord from the AC socket and clean the vents.

• The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky loca- tion.

-56

Page 57 Page 59
Image 58
Page 57 Page 59
Contents XG-C465X-L XG-C435X-L Model No Serial No Introduction Product Disposal Buttons used in this Info Indicates safeguards when using the projectorOperation Contents Setup Manual For Windows¨ When you want to view the setup manualFor Macintosh¨ Power Sources CleaningAccessories Power-Cord ProtectionRest your eyes occasionally Avoid locations with extremes of tem- peratureTemperature monitor function Using the projector in other countriesOther connected equipment Supplied accessories AccessoriesOptional accessories Lens Throw DistanceOptional lenses ScreenPart Names and Functions ProjectorTerminals Using the Remote Control with a Signal Cable Remote ControlPart Names and Functions Usable Range Using the Remote ControlWhen using the remote control Inserting the BatteriesSetup and Projection Quick StartAdjust the angle Setting Up the Projector Setting Up the ProjectorMenu item ÒFrontÓ Projection PRJ ModeMenu item ÒRearÓ Stretch Mode Setting Up the ProjectorNormal Mode Standard Zoom LensYou may need other cables or connectors not listed below Samples of Cables for ConnectionSamples of Cables for Connection Connecting to a Computer Supplied RGB cable AccessoryConnecting to a Computer When connecting with a DVI digital cableConnecting to Video Equipment When connecting video equipment with a DVI output terminalConnecting to Video Equipment When connecting video equipment with video output terminalAccessory Controlling the Projector by a ComputerWhen connecting to the LAN terminal using a LAN cable Connecting to a Monitor with RGB Input TerminalControlling the Projector by a Computer Connecting to an Amplifier or Other Audio Equipment Turning the Projector On/Off Connecting the Power CordTurning the Power Off Put Turning the Projector OnAdjustment foot Height Adjustment button Tilt dial Using the Adjustment FeetPress the Height Adjustment but- tons Image ProjectionImage Projection Button MOUSE/Adjustment Buttons //\ Return buttonCorrecting Trapezoidal Distortion Press KeystoneZoom knob Adjusting the LensOut Zoom VOL +/- Volume buttons AV Mute button Switching the Input ModeAdjusting the Volume Video buttonsAuto Sync Auto Sync Adjustment Displaying and Setting the Break TimerSwitching the Eco+Quiet Mode Freezing a Moving ImagePress Magnify on the remote control Selecting the Picture ModeDisplaying an Enlarged Portion of an Image Resize Mode Press Resize Resize buttonAbout Copyrights VIDEO/DTVWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Following shows the items that can be set in the projectorÒSignal adjustment SIG-ADJÓ menu Projector adjustment PRJ-ADJ menu Menu ItemsPress or \ and select ÒPic- tureÓ to adjust Using the Menu ScreenMenu Selections Adjustments Press MenuPress or and select ÒBrightÓ to adjust To adjust the pro- jected image while watching itUsing the Menu Screen Press \ or to adjust the item selectedSelecting the Picture Mode Picture Adjustment ÒPictureÓ menu2Adjusting the Image Picture Adjustment ÒPictureÓ menu Selecting the Film Mode8Eco+Quiet Mode Setting Reducing Image Noise DNRSignal Type Setting Signal Adjustment ÒSIG-ADJÓ MenuAuto Sync Adjustment Resolution SettingSignal Adjustment ÒSIG-ADJÓ Menu Checking the Input SignalSetting the Video System Selecting the Dynamic RangeAdjusting the Image Position Screen Adjustment ÒSCR-ADJÓ MenuSetting the Resize Mode 3Keystone Correction7Reversing/Inverting Pro- jected Images Setting the On-screen DisplayScreen Adjustment ÒSCR-ADJÓ Menu 8Selecting the On-screen Display LanguageAudio Output Type Setting Auto Power Off Function4Speaker Setting Auto Restart Function8Selecting the Transmis- sion Speed RS-232C 9Fan Mode SettingHelpful Functions Set during Installation ÒPRJ-ADJÓ menu System Lock FunctionChecking the Lamp Life Status Returning to the Default SettingsKeylock Function Locking the Operation Buttons on the ProjectorIf you forget the password Setting a PasswordSelect ÒPasswordÓ, then press Set the TCP/IP manually Dhcp Client SettingTCP/IP Setting You can confirm the MAC address and projector nameCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsReplacing the Air Filter Disconnect the power cordReplacing the Air Filter Remove the filter coverReplacing the Air Filter Place a replacement air filterReplace the filter cover About the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Maintenance Indicators Lamp Regarding the LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitRegarding the Lamp Remove the lamp unitReset the lamp timer Resetting the Lamp TimerConnect the power cord Insert the new lamp unitPage Computer Compatibility Chart ComputerTroubleshooting 23-29Problem Check For Sharp Assistance Specifications Index Audio output terminal Auto V-KeystoneSharp Corporation
Related manuals
Manual 73 pages 46.92 Kb

XG-C435X-L, XG-C465X-L specifications

The Sharp XG-C465X-L and XG-C435X-L projectors are sophisticated devices designed for a range of professional environments, including corporate settings, educational institutions, and high-stakes presentations. Both models boast impressive specifications and features that cater to users seeking high-quality projection capabilities.

Firstly, the XG-C465X-L model is equipped with a WXGA resolution of 1280 x 800 pixels, making it ideal for displaying detailed graphics and videos with clarity. It delivers a brightness of up to 4600 ANSI lumens, ensuring that presentations remain vivid even in bright rooms. The contrast ratio of 5000:1 further enhances image quality, allowing for deeper blacks and brighter whites, which makes content more engaging.

On the other hand, the XG-C435X-L features a slightly lower brightness level of 4300 ANSI lumens while maintaining the same WXGA resolution. This makes it a suitable choice for users who need a dependable projector in slightly darker environments. The contrast ratio for this model is also impressive, at 4000:1, providing excellent image depth.

Both projectors utilize DLP (Digital Light Processing) technology, which is known for its reliability and vibrant color reproduction. This technology significantly reduces the chances of image distortion and offers sharp edges for text and graphics, making it perfect for detailed presentations. Additionally, the projectors come with a long-lasting lamp life of up to 5000 hours in eco mode, allowing for extended use without frequent replacements.

Connectivity options are another significant highlight of these projectors, as they support HDMI, VGA, and various audio inputs, ensuring compatibility with a range of devices such as laptops, Blu-ray players, and video conferencing systems. The inclusion of a USB port further adds versatility, allowing for presentations directly from USB drives without the need for a computer.

User-friendly features such as keystone correction and a flexible lens system make installation and setup straightforward, while the built-in speaker eliminates the need for external audio solutions in smaller setups. The lightweight design of both models makes transportation easy, a beneficial feature for users who frequently move between locations.

In summary, both the Sharp XG-C465X-L and XG-C435X-L projectors are built to meet the demands of various professional environments, offering high brightness, superb image quality, and versatile connectivity options. Their technological advancements and user-friendly features solidify their place as strong contenders in the projector market.
Top Page Image Contents