Sharp XG-C335X, XG-C430X, XG-C330X specifications After the initialization, carry out setting again

Page 43

Troubleshooting

\Check if the “TCP/IP” protocol is operating correctly using the “PING” command. Also, check if an IP address is set.

1.Open a command prompt (MS-DOS Prompt).

•In the case of Windows® 98 or 98SE: click “START” ➔ “Programs” ➔ “MS-DOS Prompt” in order.

•In the case of Windows® Me: click “START” ➔ “Programs” ➔ “Accessories” ➔ “MS-DOS Prompt” in order.

•In the case of Windows® 2000: click “START” ➔ “Programs” ➔ “Accessories” ➔ “Command Prompt” in order.

•In the case of Windows® XP: click “START” ➔ “All Programs” ➔ “Accessories” ➔ “Command Prompt” in order.

2.After launching the command prompt (MS-DOS Prompt) enter a command “PING”. Entry example C:\>Ping XXX.XXX.XXX.XXX

“XXX.XXX.XXX.XXX” should be entered with an IP address to be connected to, such as the projector.

3.When connecting normally, the display will be as follows.

(The screen may be slightly different depending on the OS type). <Example> when the IP address connected to is “192.168.150.2”

4.When a command cannot be sent, “Request time out” will be displayed. Check the network setting again.

If communication can still not be established properly, contact your network administrator.

5.To return to the Windows® screen, enter “exit” and then press the “Enter” key.

A connection cannot be made because you have forgotten your user name or your password.

\Initialize the settings. (See page 54 of the projector’s operation manual.)

\After the initialization, carry out setting again.

-43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Setup Manual Standard Setup Front Projection Setting up the Screen12.2 15.2m 50ft Screen Size and Projection DistanceThrow Distance ScreenF1.7-F1.9, f=28.0-33.6 mm Normal ModeStretch Mode Standard Zoom LensF2.2-F2.7, f=24.5-30.7 mm Wide-zoom Lens AN-C12MZF1.7-F2.2, f=36.5-46.3 mm Tele-zoom Lens AN-C18MZF2.0-F2.8, f=53.8-82.9 mm Tele-zoom Lens AN-C27MZF2.1-F2.8, f=83.5-117.2 mm Tele-zoom Lens AN-C41MZInfo Changing the LensInsert the lens into the projector Replace the lens housing coverCOMPUTER-RGB Input/Output Component Input/Output Connecting Pin AssignmentsPin No. Signal Connecting Pin AssignmentsComputer control Communication conditions RS-232C Specifications and CommandsBasic format W R CommandsReturn DVI Progressive 3D OK or ERR Lamp Timer Reset command is available only in standby mode Network settings on the computer Setting up the Projector Network EnvironmentConnecting the Pro- jector to a Computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector Dhcp Controlling the Projector via LAN Controlling the Projector Using Internet ExplorerVersion 5.0 or later Control Confirming the ProjectorControlling the Projector Status StatusNetwork Security Setting and AdjustingSetting the Security Projector Settings & AdjustmentsGeneral Making General Settings for the Network NetworkSetting for Sending E-mail when an Error Occurs Mail Originator SettingsOccurs Service & Support Access URL Mail Recipient SettingsExample of the display when an error occurs Launch general purpose terminal emulator Setting up the Projector Using RS-232C or TelnetWhen Connecting Using RS-232C Input setup and press the Enter keyClickStartfrom theWindows desk- top and select Run When Connecting Using TelnetSetup Menu Main Menu VView All Setting View Setting Detail ListSet Items Tings QQuit Unchanged Save Settings and QuitQuit without Saving Set SSave & QuitUser Name Setting IP Address SettingDefault Gateway Setting Subnet Mask SettingRS-232C Baud Rate Set Password SettingProjector Name Setting Dhcp Client SettingData Port Setting Disconnecting All ConnecSetting Auto Logout Time Entering Advanced Setup MenuCarrying out Network Ping Test Setting of Accept IP Ad- dressAccepting All IP Addresses Return to Default Settings Setting of Search PortReturn to Main Menu Resetting the Lamp Timer of the Projector via LAN Close HyperTerminal Resetting the Lamp Timer of the Projector via LANWhen connecting the projector using serial-connection TroubleshootingTroubleshooting \ After the initialization, carry out setting again Units inches mm DimensionsWhen AN-C41MZ is installed When AN-C12MZ is installedWhen AN-C18MZ is installed When AN-C27MZ is installed
Related manuals
Manual 2 pages 32.09 Kb

XG-C330X, XG-C335X, XG-C430X specifications

The Sharp XG-C430X and XG-C330X are advanced projectors designed to deliver high-quality presentations and visuals, making them ideal for educational, corporate, and professional environments. Both models leverage cutting-edge technologies to provide an efficient and impactful viewing experience.

One of the standout features of the XG-C430X and XG-C330X is their impressive brightness levels, making them suitable for diverse lighting conditions. The XG-C430X boasts a brightness of 4300 lumens, while the XG-C330X delivers 3300 lumens, ensuring that images remain vibrant and clear even in well-lit rooms. This high brightness, combined with a native resolution of XGA (1024 x 768), allows both projectors to produce sharp and detailed images for presentations, graphics, and video content.

The projectors are built with DLP (Digital Light Processing) technology, which enhances color accuracy and contrast, resulting in high-quality visuals with rich colors and deep blacks. This technology also minimizes the rainbow effect often found in traditional projection systems, providing a smoother viewing experience. Additionally, they use a reliable lamp with a long lifespan, requiring less frequent replacements and ensuring cost-effectiveness over time.

Another key characteristic of the XG-C430X and XG-C330X is their versatility in connectivity options. They come equipped with multiple input ports, including HDMI, VGA, and composite video, allowing users to connect various devices such as laptops, DVD players, and streaming devices seamlessly. This capability enhances usability, making them suitable for a wide range of applications, from classroom learning to business presentations.

The lightweight and portable design of both projectors makes them easy to transport between locations, catering to the needs of users who require mobility. Their compact size does not compromise performance, making them an excellent choice for organizations that need reliable and high-performing projection solutions.

Additionally, the XG-C430X and XG-C330X feature automatic keystone correction, simplifying setup and ensuring that the projected image is perfectly aligned. This functionality helps to eliminate distortions that can occur when the projector is not perfectly centered, enhancing the overall viewing experience.

In summary, the Sharp XG-C430X and XG-C330X projectors combine high brightness, superior image quality, versatile connectivity, and user-friendly features, making them ideal for a range of professional and educational settings. Their advanced DLP technology, portability, and cost-effective operation further solidify their status as top choices for high-performance projection needs.
Top Page Image Contents