Sharp XG-C330X Setting up the Projector Using RS-232C or Telnet, When Connecting Using RS-232C

Page 29

Setting up the Projector Using RS-232C or Telnet

Connect the projector to a computer using RS-232C or Telnet, and open the SETUP MENU on the computer to carry out various settings for the projector.

When Connecting Using RS-232C

1 Launch general purpose terminal emulator.

2 Input settings for the RS-232C port of the terminal emulator as follows.

Baud Rate

: 9600 bps*

Data Length

: 8 bit

Parity Bit

: None

Stop Bit

: 1 bit

Flow Control

: None

*This is the factory default setting. If the value of Baud Rate for the projector has been changed, set Baud Rate here according to the changed value on the projector.

7 Input “setup” and press the “Enter” key.

SETUP MENU will be displayed.

SETUP MENU

---------------------------------

SETUP MENU--------------------------------

 

[1]IP Address

[2]Subnet Mask

[3]Default Gateway

[4]User Name

[5]Password

 

[6]RS-232C Baud Rate

[7]Projector Name

[8]DHCP Client

[A]Advanced Setup

 

[D]Disconnect All

[V]View All Setting

[S]Save & Quit

[Q]Quit Unchanged

setup>

 

 

 

 

 

Note

User name and password are not set in the fac- tory default settings.

If the user name or password is entered incor- rectly three times, SETUP MENU will be quit.

3 Input“PJS11234”and press the“En- ter” key.

4 “OK”is displayed. Input“PJS25678” and press the “Enter” key within 10 seconds.

5

“User Name:”is displayed. Input the user name and press the “Enter” key.

If a user name has not yet been set, just press the “Enter” key.

6

“Password:” is displayed. Input the password and press the“Enter”key.

If a password has not yet been set, just press the “Enter” key.

-29

Image 29
Contents Setup Manual Standard Setup Front Projection Setting up the ScreenThrow Distance Screen Size and Projection DistanceScreen 12.2 15.2m 50ftStretch Mode Normal ModeStandard Zoom Lens F1.7-F1.9, f=28.0-33.6 mmF2.2-F2.7, f=24.5-30.7 mm Wide-zoom Lens AN-C12MZF1.7-F2.2, f=36.5-46.3 mm Tele-zoom Lens AN-C18MZF2.0-F2.8, f=53.8-82.9 mm Tele-zoom Lens AN-C27MZF2.1-F2.8, f=83.5-117.2 mm Tele-zoom Lens AN-C41MZInfo Changing the LensInsert the lens into the projector Replace the lens housing coverCOMPUTER-RGB Input/Output Component Input/Output Connecting Pin AssignmentsPin No. Signal Connecting Pin AssignmentsBasic format RS-232C Specifications and CommandsComputer control Communication conditions W R CommandsReturn DVI Progressive 3D OK or ERR Lamp Timer Reset command is available only in standby mode Network settings on the computer Setting up the Projector Network EnvironmentConnecting the Pro- jector to a Computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector Dhcp Version 5.0 or later Controlling the Projector Using Internet ExplorerControlling the Projector via LAN Controlling the Projector Confirming the ProjectorStatus Status ControlSetting the Security Setting and AdjustingProjector Settings & Adjustments Network SecuritySetting for Sending E-mail when an Error Occurs Making General Settings for the Network NetworkMail Originator Settings GeneralExample of the display when an error occurs Mail Recipient SettingsOccurs Service & Support Access URL When Connecting Using RS-232C Setting up the Projector Using RS-232C or TelnetInput setup and press the Enter key Launch general purpose terminal emulatorClickStartfrom theWindows desk- top and select Run When Connecting Using TelnetSetup Menu Main Menu Set Items View Setting Detail ListVView All Setting Quit without Saving Set Save Settings and QuitSSave & Quit Tings QQuit UnchangedDefault Gateway Setting IP Address SettingSubnet Mask Setting User Name SettingProjector Name Setting Password SettingDhcp Client Setting RS-232C Baud Rate SetSetting Auto Logout Time Disconnecting All ConnecEntering Advanced Setup Menu Data Port SettingAccepting All IP Addresses Setting of Accept IP Ad- dressCarrying out Network Ping Test Return to Main Menu Setting of Search PortReturn to Default Settings Resetting the Lamp Timer of the Projector via LAN Close HyperTerminal Resetting the Lamp Timer of the Projector via LANWhen connecting the projector using serial-connection TroubleshootingTroubleshooting \ After the initialization, carry out setting again Units inches mm DimensionsWhen AN-C18MZ is installed When AN-C12MZ is installedWhen AN-C27MZ is installed When AN-C41MZ is installed
Related manuals
Manual 2 pages 32.09 Kb

XG-C330X, XG-C335X, XG-C430X specifications

The Sharp XG-C430X and XG-C330X are advanced projectors designed to deliver high-quality presentations and visuals, making them ideal for educational, corporate, and professional environments. Both models leverage cutting-edge technologies to provide an efficient and impactful viewing experience.

One of the standout features of the XG-C430X and XG-C330X is their impressive brightness levels, making them suitable for diverse lighting conditions. The XG-C430X boasts a brightness of 4300 lumens, while the XG-C330X delivers 3300 lumens, ensuring that images remain vibrant and clear even in well-lit rooms. This high brightness, combined with a native resolution of XGA (1024 x 768), allows both projectors to produce sharp and detailed images for presentations, graphics, and video content.

The projectors are built with DLP (Digital Light Processing) technology, which enhances color accuracy and contrast, resulting in high-quality visuals with rich colors and deep blacks. This technology also minimizes the rainbow effect often found in traditional projection systems, providing a smoother viewing experience. Additionally, they use a reliable lamp with a long lifespan, requiring less frequent replacements and ensuring cost-effectiveness over time.

Another key characteristic of the XG-C430X and XG-C330X is their versatility in connectivity options. They come equipped with multiple input ports, including HDMI, VGA, and composite video, allowing users to connect various devices such as laptops, DVD players, and streaming devices seamlessly. This capability enhances usability, making them suitable for a wide range of applications, from classroom learning to business presentations.

The lightweight and portable design of both projectors makes them easy to transport between locations, catering to the needs of users who require mobility. Their compact size does not compromise performance, making them an excellent choice for organizations that need reliable and high-performing projection solutions.

Additionally, the XG-C430X and XG-C330X feature automatic keystone correction, simplifying setup and ensuring that the projected image is perfectly aligned. This functionality helps to eliminate distortions that can occur when the projector is not perfectly centered, enhancing the overall viewing experience.

In summary, the Sharp XG-C430X and XG-C330X projectors combine high brightness, superior image quality, versatile connectivity, and user-friendly features, making them ideal for a range of professional and educational settings. Their advanced DLP technology, portability, and cost-effective operation further solidify their status as top choices for high-performance projection needs.