NAD T 763 owner manual Front Panel, Search

Page 10

FRONT PANEL

1STANDBY SWITCH: Pressing this key, or the HTR 2 remote’s [ON] button, will switch the receiver on, making it operational, changing the amber Standby indicator to green and illuminating the VFL display.

2STANDBY LED: Illuminates amber when the T 753 is in Standby mode; green when it is powered on; and flashes momentarily to indicate infrared commands received from the HTR 2 remote. Protection Mode is indicated by a red illumination, and indicates that there is a problem with your set- up or the unit itself. When the fault is removed, normal operation can be resumed (this may require turning the unit off and on again). This indicator will be steadily dark only when the main POWER switch (REAR PANEL No.9) is switched off (or the receiver is unplugged from the AC supply).

3AM/FM: Press to toggle between the tuner’s AM and FM bands.

4FM MUTE/MODE: In the normal Mute position, only the stations with a strong signal can be listened to, and the noise between stations is muted. Pressing the [FM Mute/Mode] button allows distant (and potentially noisy) stations to be received. (See “Listening to Radio”)

5DISPLAY: Press to display the channel mode of the currently selected source (other than the internal AM/FM tuner), in the format “front/rear/LFE.” For example, a Dolby Digital or DTS 5.1-channel source will display 3/2.1. Note that the display shows signal channels, not speakers; for example, a 2-channel analog or digital source (whether stereo or surround-encoded) will show 2/0.0, even though the receiver’s <Speaker Settings> may indeed be set up to use the subwoofer with all sources, and the current Listening Mode may employ center and surround speakers.

When the AM/FM tuner is the selected input, sequentially pressing DISPLAY shows the currently tuned station’s RDS data, toggling between the current station’s Radio Text and Station Name displays (see Listening to Radio, below).

6MEMORY: Use to store tuned stations to the T 753’s 40 preset-memory locations. (see Listening to Radio, below)

7PRESET : Press to step up or down between radio presets; 30 FM and 10 AM station presets are available. Note that this function “wraps”:

Pressing

will step from Preset 30 to Preset 1, or vice versa using the key. “Unused” presets are skipped over. (Note that Presets must previously

have been stored; see “Listening to Radio,” below.)

 

8 SEARCH

: Press momentarily to step up or down between FM or AM frequencies. Press and hold SEARCH

for more than 2 seconds to

search up or down; the T 753’s tuner will stop at the next sufficiently strong signal it encounters. Note that this function, too, “wraps,” and will continue searching up or down from one end of the AM or FM band to the other.

Note that: SEARCH tunes the FM band by 0.05 MHz steps (twice the precision of most tuners and receivers). On the AM band, SEARCH moves by 10 kHz or 9 kHz steps. To change the step amount, hold in the FM MUTE/MODE and AM/FM keys simultaneously.

9VFL DISPLAY: The Vacuum Fluorescent Display provides visual information on all of the T 753’s important modes, settings, and functions for both MAIN and second ZONE locations.

10VOLUME (SETUP): Turn clockwise to increase the master-volume setting; counterclockwise to lower it. The VFL and on-screen displays show the setting, displayed in decibels between –74 and +18.

The VOLUME (SETUP) knob is also used to increment/decrement individual channel levels and other adjustable parameters.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents English Precautions Safety InformationExplanation of Graphical Symbols InstallationDamage Requiring Service Electric PowerMaintenance Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Troubleshooting Specifications Using the HTR 2 Remote ControlGetting the Most from the NAD T WHAT’S in the BOX Unpacking and SetupConnecting AM Antenna Choosing a LocationEase of USE About the TR.S., Matrix and Digital Surround IntegrationAbout the HTR 2 System Remote Control UpgradabilityQuickstart Play a DVD MovieFront Panel SearchDigital Input Jack Rear Panel +12V Trigger IN/OUTRear Panel Getting Started Setting UP the TDealing with HUM and Noise About the ON-SCREEN Displays OSD and FRONT-PANEL Readout Input SetupInput Settings Display the OSDSpeaker Settings Speaker SetupListening Mode Setting Channel Balance CHANNEL-BALANCE Test SetupUsing AN SPL Meter Setting Speaker DistanceCreating Presets Recalling PresetsUsing the T Selecting Radio Presets Tuning StationsSetting Radio Presets Choosing the FM Mute / ModeDTS ES Matrix DTS ES Expanded Surround DTS ESDTS-ES Discrete DTS NEO 6 SurroundDolby PRO Logic II Movie Dolby PRO LogicDolby PRO Logic II Surround Dolby PRO Logic II MusicSelecting Listening Modes Displaying the Signal ModeDTS Adjusting Listening Modes DTS NeoTo Adjust Channel Levels Surround Sound Channel ChartAdjusting Channel Levels on the FLY Adjusting the Tone ControlsControlling the T Using the HTR 2 Remote ControlSpecifications Learning Codes from Other RemotesPUNCH-THROUGH Copy a Command from Another KEYMacro Commands Recording MacrosDelete Mode KEY-ILLUMINATION TimeoutFactory Reset Loading CODE-LIBRARIESSummary of HTR 2 Modes Using the ZR 2 Remote ControlTrigger Setup Assigning the Trigger OutputTroubleshooting Condition Possible Causes Possible SolutionssAV Surround Sound Receiver SpecificationsPhysical Specifications Amplifier SectionNAD

T 763 specifications

The NAD T 763 is a high-performance audio-video receiver that has garnered attention for its exceptional sound quality and versatile features. Designed for home theater enthusiasts, the T 763 combines advanced technologies to deliver an immersive audio experience, making it a recommended choice for both movie lovers and music aficionados.

One of the standout features of the NAD T 763 is its power output. It delivers 70 watts per channel into 8 ohms, ensuring that it can drive a variety of speakers with ease. This model integrates NAD's proprietary PowerDrive technology, which optimizes power delivery and ensures dynamic sound reproduction, even in demanding passages. This makes it suitable for a range of audio setups, from small living rooms to large home theaters.

The T 763 supports multiple audio formats, including Dolby Digital and DTS decoding. This capability allows users to enjoy high-fidelity soundtracks from DVDs and Blu-ray discs, creating an enveloping sound experience. Moreover, its compatibility with Pro Logic II means that it can effectively decode stereo signals into multi-channel formats, enhancing the listening experience for older media.

In terms of connectivity, the NAD T 763 does not disappoint. It features multiple inputs, including several HDMI ports, optical and coaxial digital inputs, and legacy connections like RCA for older equipment. This extensive range of connections allows users to integrate various sources, such as game consoles, streaming devices, and CD players with ease.

The T 763 also includes a user-friendly interface that simplifies operation. The intuitive on-screen menus make it easy to navigate through settings and customize audio performance. Additionally, the receiver comes with a remote control, providing convenience at your fingertips.

Another notable characteristic is the NAD's commitment to build quality. The T 763 is constructed with robust materials that enhance durability, ensuring that it can withstand years of use. The sleek design fits seamlessly into any audio-visual setup, appealing to aesthetic sensibilities alongside its performance capabilities.

In summary, the NAD T 763 is a versatile and powerful audio-video receiver that excels in sound quality and connectivity. With its innovative technologies and solid build, it stands out as a compelling option in the competitive landscape of home theater equipment. Whether for movie nights or music playback, the T 763 promises to elevate the home entertainment experience.
Top Page Image Contents