NAD T 763 owner manual Rear Panel, +12V Trigger IN/OUT

Page 12

REAR PANEL

1

17

16

T 753 (AH) NORTH AMERICA

MS OUT

2

3

4

5

6

 

 

Serial No./No. De Series

 

 

+12V TRIGGER

7

8

 

 

 

POWER

ON

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

14

13

12

11

 

10

9

 

AC OUTLET

230V ~50HZ 120W 1A MAX

T 753 (C) EUROPEAN VERSION

ATTENTION!

Please make all connections to your T 753 receiver with the unit powered off or unplugged. (It is also advisable to power-down or unplug all associated components while making or breaking any signal or AC power connections.)

1FM & AM ANTENNA: The supplied wire “dipole” FM antenna will connect to the FM connector using the supplied “balun” adapter. It will usually work best when mounted on a vertical surface such as a wall, with arms fully outstretched forming a horizontal “T” perpendicular to the origin point of the signal. Experiment with placement and orientation of to yield the clearest sound and lowest background noise. In areas of difficult FM reception an external FM antenna can yield dramatic gains in quality; consult your NAD audio specialist or a professional antenna installer.

The AM loop antenna supplied with the T 753 (or a suitable replacement) is required for AM reception. Open the clip terminal lever, insert the wire and close, ensuring that the lever locks the wire in place. Testing different positions for the antenna may improve reception; vertical orientation will usually produce the best results. Antenna proximity to large metal objects (appliances; radiators) may impair reception, as will attempts to lengthen the wire to the loop.

NOTE: An external AM antenna can improve long-distance reception substantially; consult your NAD audio specialist or a professional antenna installer. Do not connect anything other than a loop antenna to the AM ANTENNA terminal. Do not remove the AM loop antenna.

2SOFT CLIPPING: Enables NAD’s proprietary Soft Clipping circuitry on all channels. Soft Clipping gently limits the output of the T 753 to minimize audible distortion, even should the receiver be over-driven.

NOTE: Soft Clipping may simply be left on at all times to reduce the likelihood of audible distortion from excessive volume settings. However, for critical listening, to preserve optimum dynamics you may wish to defeat it by setting this switch off.

3MONITOR OUT: Connect to video input of the monitor/television, using quality dual-RCA and/or S-Video cables designed for video signals. In general, the S-Video connection is superior and should be used if your TV/monitor provides the corresponding input.

NOTE: The T 753 “transcodes” S-Video to composite-video signals, so that S-Video signals connected to the DVD, SAT, VCR, and VIDEO 4-6 inputs will be present at both the S-Video and composite MONITOR OUT jacks when any of these inputs is selected. This provides the convenience of requiring only a single video connection (usually S-Video) between the T 753 and the TV/monitor.

4CD: Connect the analog stereo audio output from a CD player or other line-level audio source to this input.

5IR: These mini-jacks accept and output remote-control codes in electrical format, using industry-standard protocols, for use with “IR-repeater” and multi-room systems and related technologies. Consult your NAD audio specialist for more information.

6+12V TRIGGER IN/OUT:

TRIGGER IN connects to the 12-volt trigger outputs of compatible components such as power controllers and home automation devices. The TRIGGER AUTO/OFF switch selects the 12V Trigger Input and disables the remote and front panel ON function.

TRIGGER OUT connects to 12V Input of compatible devices (such as amplifiers and projector-lifts) to automate turn on/off or activation. See “Trigger Setup”, your NAD audio specialist also can provide more information on using the T 753’s triggers.

AUTO TRIGGER SWITCH when in the AUTO position, forces the T 753 to turn on only when a trigger signal is present at the trigger input. When in the OFF position, the trigger inputs are disabled.

7COMPONENT VIDEO IN 1-2; OUT: Connect the COMPONENT VIDEO IN 1, and 2 inputs to component-video outputs from compatible source components, typically a DVD player and terrestrial or satellite HDTV tuner. Connect the T 753 COMPONENT VIDEO OUT to the component-video input of a compatible video monitor/TV. Be sure to observe consistency in connecting the Y/Cr/Cb jacks (some source and TV components label these Y/

Pb/Pr) to the corresponding sources/inputs; do not rely purely on the colour-coding of the jacks, which may not always be consistent among brands. The routing of the component-video inputs follows the S-Video/composite, but is default as: COMPONENT VIDEO IN 1 is routed to the COMPONENT VIDEO OUT jacks when the DVD input is selected; COMPONENT VIDEO IN 2 is selected when the SAT input is active; the audio and digital inputs

12assigned to DVD, and SAT will be used (see also, "Input Setup”).

Page 11 Page 13
Image 12
Page 11 Page 13
Contents English Safety Information Explanation of Graphical SymbolsPrecautions InstallationElectric Power MaintenanceDamage Requiring Service Do not Attempt to Service the Unit Yourself OWNER’S RecordTable of Contents Using the HTR 2 Remote Control Troubleshooting SpecificationsGetting the Most from the NAD T Unpacking and Setup Connecting AM AntennaWHAT’S in the BOX Choosing a LocationAbout the T R.S., Matrix and Digital SurroundEase of USE IntegrationAbout the HTR 2 System Remote Control UpgradabilityQuickstart Play a DVD MovieFront Panel SearchDigital Input Jack Rear Panel +12V Trigger IN/OUTRear Panel Setting UP the T Getting StartedDealing with HUM and Noise Input Setup Input SettingsAbout the ON-SCREEN Displays OSD and FRONT-PANEL Readout Display the OSDSpeaker Setup Speaker SettingsListening Mode CHANNEL-BALANCE Test Setup Using AN SPL MeterSetting Channel Balance Setting Speaker DistanceCreating Presets Recalling PresetsUsing the T Tuning Stations Setting Radio PresetsSelecting Radio Presets Choosing the FM Mute / ModeDTS ES Expanded Surround DTS ES DTS-ES DiscreteDTS ES Matrix DTS NEO 6 SurroundDolby PRO Logic Dolby PRO Logic II SurroundDolby PRO Logic II Movie Dolby PRO Logic II MusicDisplaying the Signal Mode Selecting Listening ModesDTS Adjusting Listening Modes DTS NeoSurround Sound Channel Chart Adjusting Channel Levels on the FLYTo Adjust Channel Levels Adjusting the Tone ControlsUsing the HTR 2 Remote Control SpecificationsControlling the T Learning Codes from Other RemotesCopy a Command from Another KEY Macro CommandsPUNCH-THROUGH Recording MacrosKEY-ILLUMINATION Timeout Factory ResetDelete Mode Loading CODE-LIBRARIESUsing the ZR 2 Remote Control Trigger SetupSummary of HTR 2 Modes Assigning the Trigger OutputTroubleshooting Condition Possible Causes Possible SolutionssSpecifications Physical SpecificationsAV Surround Sound Receiver Amplifier SectionNAD

T 763 specifications

The NAD T 763 is a high-performance audio-video receiver that has garnered attention for its exceptional sound quality and versatile features. Designed for home theater enthusiasts, the T 763 combines advanced technologies to deliver an immersive audio experience, making it a recommended choice for both movie lovers and music aficionados.

One of the standout features of the NAD T 763 is its power output. It delivers 70 watts per channel into 8 ohms, ensuring that it can drive a variety of speakers with ease. This model integrates NAD's proprietary PowerDrive technology, which optimizes power delivery and ensures dynamic sound reproduction, even in demanding passages. This makes it suitable for a range of audio setups, from small living rooms to large home theaters.

The T 763 supports multiple audio formats, including Dolby Digital and DTS decoding. This capability allows users to enjoy high-fidelity soundtracks from DVDs and Blu-ray discs, creating an enveloping sound experience. Moreover, its compatibility with Pro Logic II means that it can effectively decode stereo signals into multi-channel formats, enhancing the listening experience for older media.

In terms of connectivity, the NAD T 763 does not disappoint. It features multiple inputs, including several HDMI ports, optical and coaxial digital inputs, and legacy connections like RCA for older equipment. This extensive range of connections allows users to integrate various sources, such as game consoles, streaming devices, and CD players with ease.

The T 763 also includes a user-friendly interface that simplifies operation. The intuitive on-screen menus make it easy to navigate through settings and customize audio performance. Additionally, the receiver comes with a remote control, providing convenience at your fingertips.

Another notable characteristic is the NAD's commitment to build quality. The T 763 is constructed with robust materials that enhance durability, ensuring that it can withstand years of use. The sleek design fits seamlessly into any audio-visual setup, appealing to aesthetic sensibilities alongside its performance capabilities.

In summary, the NAD T 763 is a versatile and powerful audio-video receiver that excels in sound quality and connectivity. With its innovative technologies and solid build, it stands out as a compelling option in the competitive landscape of home theater equipment. Whether for movie nights or music playback, the T 763 promises to elevate the home entertainment experience.
Top Page Image Contents