Toshiba B-EX4T1 manual Print Test Cont, „ When using a Strip Module or an optional Cutter Module

2. PRINTER SETUP

ENGLISH VERSION EO1-33089

2.8 Print Test

2.8 Print Test (Cont.)	„ When using a Strip Module or an optional Cutter Module
	It is necessary to set the issue mode, cut/strip position, etc. on the Printer
	Driver or with TPCL (TEC Printer Command Language) in accordance
	with your printing condition.
	For details of the TPCL, refer to the B-EX4T/EX6T Series External
	Equipment Interface Specification.
	Regarding how to use the Printer Driver, refer to the Help for the
	Windows Printer Drivers screen.
	To gain maximum performance and life from the Cutter Module or Strip
	Module, periodic cleaning is required.
	Before starting a cleaning, be sure to TURN OFF the printer to avoid risk
	of injury.
	For details of cleaning, refer to Section 4.1.3 Optional Cutter Module.

E2-59