2.11Sensor Setting (Cont.)

2.PRINTER SETUP

ENGLISH VERSION EO1-33089

2.11 Sensor Setting

2.11Sensor Setting (Cont.)

(1)REFLECT

1.Select “REFLECT” from the Sensor Adjust menu.

2.Place the tag paper to be used on the reflective sensor so that the sensor can detect a print area.

3.Hold down the [ENTER] for 3 seconds or more.

4.When registration of the “print area level” is completed, “Adjust Complete” is displayed and an asterisk is shown on the right side of the voltage.

(2)TRANS.

1.Select “TRANS.” from the Sensor Adjust menu.

2.Remove some labels and place the backing paper so that the Transmissive sensor can detect it.

3.Hold down the [ENTER] for 3 seconds or more.

4.When registration of the “label gap level” is completed, “Adjust Complete” is displayed and an asterisk is shown on the right side of the voltage.

(3)PE REFL./TRANS.

1.Select “PE REFL./TRANS.” from the Sensor Adjust menu.

2.Remove any media from the media sensor.

3.Hold down the [ENTER] for 3 seconds or more.

4.When registration of the “no media level” is completed, “Adjust Complete” is displayed and an asterisk is shown on the right side of the voltage.

E2-70

Page 84
Image 84
Toshiba B-EX4T1 manual Sensor Setting Cont, Pe Refl./Trans